2009 Dodge Charger Owner Manual - Page 239

UNDERSTANDING YOUR INSTRUMENT PANEL 237 • Connecting an iPod௡ to the AUX port located in the radio faceplate, plays media, but does not use the UCI feature to control the connected device. Connecting The iPodா Use the optional connection cable to connect an iPod௡ to the vehicle's 16-pin connector port (which is located in the glove compartment on some vehicles). Once the iPod௡ is connected and synchronized to the vehicle's UCI system (iPod௡ may take a few seconds to connect), the iPod௡ starts charging and is ready for use by pressing radio switches, as described below. NOTE: • You may have to remove the connector pin protection cap from the 16-pin connector port, prior to connecting the cable. • If the iPod௡ battery is completely discharged, it may not communicate with the UCI system until a minimum charge is attained. Leaving the iPod௡ connected to the UCI system may charge it to the required level. Using This Feature By using the optional connection cable to connect an iPod௡ to the vehicle's UCI 16-pin connector port: • The iPod௡ audio can be played on the vehicle's sound system, providing metadata (Artist, track title, album, etc.) information on the radio display. • The iPod௡ can be controlled using the radio buttons to Play, Browse, and List the iPod௡ contents. • The iPod௡ battery charges when plugged into the UCI connector. Controlling The iPodா Using Radio Buttons To get into the UCI (iPod௡) mode and access a connected iPod௡, press the 'AUX' button on the radio faceplate. 4