1998 Ford Ranger Scheduled Maintenance Guide 2nd Printing - Page 15

1998 Ford Ranger Manual

Page 15 highlights

Normal schedule 160,000 KILOMETERS (100,000 MILES) u u u u Change engine oil and replace oil filter. Replace spark plugs (3.0L & 4.0L engines) Inspect accessory drive belt (3.0L engine). All front and rear (non-synthetic) axle lube quantities (4x4) must be replaced every 160,000 kilometers (100,000 miles) or if the axle has been submerged in water. Otherwise the lube should not be checked or changed unless a leak is suspected or repair required. DEALER AUTHORIZATION Date: Mileage: 168,000 KILOMETERS (105,000 MILES) u Change engine oil and replace oil filter. u Inspect engine cooling system, hoses, and clamps; check coolant strength every 24,000 km (15,000 miles) or 12 months. u Rotate tires and adjust air pressure (1). u Lubricate rear driveshaft double cardan joint centering ball (SWB 4x4). u Lubricate driveshaft U-joint if equipped with grease fittings and lubricate slip yoke (if equipped). u Inspect disc brake system and lubricate caliper slide rails. u Inspect drum brake systems, hoses and lines. u Check clutch reservoir fluid level. u Inspect exhaust system for leaks, damage or loose parts. Remove any foreign material trapped by exhaust system shielding. NOTE: It is normal for a certain amount of moisture and staining to be present around the muffler seams. The presence of soot, light surface rust or moisture does not indicate a faulty muffler. DEALER AUTHORIZATION Date: Mileage: 15

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39

160,000 KILOMETERS (100,000 MILES)
Change engine oil and replace oil filter.
Replace spark plugs (3.0L & 4.0L engines)
Inspect accessory drive belt (3.0L engine).
All front and rear (non-synthetic) axle lube quantities (4x4) must be
replaced every 160,000 kilometers (100,000 miles) or if the axle has
been submerged in water. Otherwise the lube should not be checked
or changed unless a leak is suspected or repair required.
DEALER AUTHORIZATION
Date:
Mileage:
168,000 KILOMETERS (105,000 MILES)
Change engine oil and replace oil filter.
Inspect engine cooling system, hoses, and clamps; check coolant
strength every 24,000 km (15,000 miles) or 12 months.
Rotate tires and adjust air pressure (1).
Lubricate rear driveshaft double cardan joint centering ball (SWB
4x4).
Lubricate driveshaft U-joint if equipped with grease fittings and
lubricate slip yoke (if equipped).
Inspect disc brake system and lubricate caliper slide rails.
Inspect drum brake systems, hoses and lines.
Check clutch reservoir fluid level.
Inspect exhaust system for leaks, damage or loose parts. Remove any
foreign material trapped by exhaust system shielding.
NOTE:
It is normal for a certain amount of moisture and staining to be
present around the muffler seams. The presence of soot, light surface
rust or moisture does not indicate a faulty muffler.
DEALER AUTHORIZATION
Date:
Mileage:
Normal schedule
15