2004 Ford F150 Owner Guide 5th Printing - Page 90

Locks and Security Programming remote transmitters It is necessary to have all (maximum of six - original and/or new) of your remote transmitters available prior to beginning this procedure. If all remote entry transmitters are not present during the programming procedure, the transmitters that are not present during programming will no longer operate the vehicle. Note: Do not press the brake pedal anytime during this sequencing, as doing so will invalidate the procedure. To program the transmitters yourself: • Unlock all doors using the power 3 door lock/unlock control. Insert a key and turn the ignition from 2 the 1 (OFF/LOCK) to the 3 (ON) position and cycle between 1 4 (OFF/LOCK) and 3 (ON) eight times in rapid succession (within 10 seconds) with the eighth turn 1 ending in the 3 (ON) position. The locks will cycle to confirm that the programming mode has been entered. • Within 20 seconds, program a remote transmitter by pressing any button on a transmitter. The locks will cycle once to confirm that the remote transmitter has been programmed. (If more than 20 seconds pass before pressing a remote transmitter button, the programming mode will exit and the procedure will have to be repeated.) • Repeat the previous step to program additional remote transmitters. The locks will cycle once to confirm that each remote transmitter has been programmed. • When you have completed programming the remote transmitters, turn the ignition to the 1 (OFF/LOCK) position or wait 20 seconds. Again the doors will lock/unlock to confirm programming has been completed. Illuminated entry The interior lamps illuminate when the remote entry system is used to unlock the door(s) or sound the personal alarm. The illuminated entry system will turn off the interior lights if: • the ignition switch is turned to the 3 (ON) position, or • the remote transmitter lock control is pressed, or • after 25 seconds of illumination. 90 2004 F150 (f12) Owners Guide (post-2002-fmt) USA English (fus)