2009 Ford Explorer Owner Guide 3rd Printing - Page 123

Driver Controls • Autounlock • Park Aid (if equipped) • Trailer sway control • Oil Life Reset and Start Value • Compass display • Compass zone adjustment • Compass calibration adjustment Briefly press the SELECT/RESET control switch to scroll through the SETUP MENU display sequence. If the SELECT/RESET control switch is not pressed within four seconds, the message center returns to the Info Menu. AWD lock (4.6L engine vehicles only) Select this function from the SETUP MENU to display the AWD locked function. 1. Press the SELECT/RESET control for the current display mode. 2. Press and hold the SELECT/RESET control within four seconds to turn the AWD system to the LOCKED mode. 3. Press the SELECT/RESET control switch for the next SETUP MENU item or wait for more than four seconds to return to the INFO MENU. Note: When the AWD system is in the LOCKED mode, the 4X4 indicator will be illuminated. System check Press and hold the SELECT/RESET control switch to select SYSTEM CHECK when "SYSTEM CHECK HOLD RESET" is displayed in the message center. Selecting this function from the SETUP MENU causes the message center to cycle through each of the systems being monitored. For each of the monitored systems, the message center will indicate either an OK message or a warning message for two seconds. Pressing the SELECT/RESET control switch cycles the message center through each of the systems being monitored. 123