2009 Ford Explorer Owner Guide 3rd Printing - Page 52

Entertainment Systems from the auxiliary source, the screen will remain black. If the video source is set to DVD-AUX, the display will automatically turn on if a video signal is detected. To listen to audio over the headphones- Dual play mode (Navigation-based radio systems only): You may listen to channels A and B over wired or wireless headphones. Refer to Using the infrared wireless headphones and Using wired headphones for further information. • Black (4) - wired headphone output (wired headphones not included) There are two ways to get into dual play mode: 1. After initially switching ignition on, when a is disc inserted, the FES immediately switches to dual-play mode. 2. Press the headphone/speaker / button on the DVD player or navigation radio touch screen. 3. Press the 2 and 4 memory presets on the radio at the same time. Repeating each of these actions will switch back to single play mode, all speakers playing and headphones off. A green light will illuminate next to either the A or B Headphone Control Button to indicate which channel is active (able to be controlled). 4. Press MEDIA to change the audio source of the active channel (A or B). The audio source will be shown on the display. You may change the active channel by pressing the A or B headphone control button. Note: Channel A can access any possible media source (AM, FM1, FM2, SAT (if equipped), CD, DVD, AUX). Channel B can only access DVD and AUX sources. Note: Refer to Single play/Dual play for more information. To listen to audio over the headphones- Dual play mode (Non-navigation based radio systems): You may listen to channels A and B over wired or wireless headphones. Refer to Using the infrared wireless headphones and Using wired headphones for further information. • Black (4) - wired headphone output (wired headphones not included) 52