2009 Ford Mustang Owner Guide 1st Printing - Page 281
2009 Ford Mustang Manual
Page 281 highlights
Item Windshield washer fluid Fuel tank 1 Add 4 oz. (118 ml) of Additive Friction Modifier XL-3 or equivalent meeting Ford specification EST-M2C118-A for complete refill of Traction-Lok axles. Capacity 4.0 quarts (3.8L) 16.0 gallons (60.6L) - - ZC-32-A / WSB-M8B16-A2 2009 05+ Mustang (197) Owners Guide USA (fus) Ford part name or equivalent Motorcraft Premium Windshield Washer Concentrate Ford part number / Ford Specification Ford design rear axles contain a synthetic lubricant that does not require changing unless the axle has been submerged in water. 2 Automatic transmissions that require MERCON V should only use MERCON V fluid. Refer to scheduled maintenance information to determine the correct service interval. Use of any fluid other than the recommended fluid may cause transmission damage. 3 Add the coolant type originally equipped in your vehicle. Approximate dry capacity, including cooler and tubes. Fluid level should be checked by an authorized dealer. Service refill capacity is covered under checking and adding manual transmission fluid in this chapter. Use of synthetic or synthetic blend motor oil is not mandatory. Engine oil need only meet the requirements of Ford specification WSS-M2C929-A (4.0L) or WSS-M2C930-A (4.6L) and the API Certification mark. 6 5 Maintenance and Specifications 4 281