2009 Ford Mustang Owner Guide 1st Printing - Page 75

Driver Controls 8. TRAC CONTROL (if equipped) 9. FUEL CAP 10. FUEL LEVEL 11. MILES TO EMPTY Display color The instrument cluster gauges are backlit with white backlighting when the headlamps are off. When the headlamps are on, the user can select one of six preset colors or one user definable color (MyColor™) for the nighttime gauge backlighting. Headlamps must be on to set up the nighttime display color. Note: A gauge in a warning condition will be lit red when the headlamps are on. 1. Press SETUP to get to the DISPLAY COLOR set up menu. 2. Pressing RESET will scroll through the following selectable colors: Green Blue Purple White Orange Red MyColor Adjust (to define MyColor™) Adjusting MyColor™: MyColor™ is a user defined backlighting color. The backlighting colors are achieved through the blending of light from Red, Green, and Blue LEDs. Apart from the six preset colors, drivers can create their own color by adjusting the levels of the three primary colors through the MyColor™ feature to achieve any of 125 different combinations. The vehicle must be stationary to enter the MyColor™ adjust mode. To enter the MyColor™ adjust mode, hold RESET for three seconds at the Adjust menu, or press SETUP to scroll though the display colors again. When in the MyColor™ adjust mode, pressing RESET will step through the Red, Green, Blue and Exit options. Pressing SETUP will increment the proportion of the color being adjusted. Try many combinations and record your favorites. To Save and Exit MyColor™ adjust hold RESET for three seconds when prompted. Pressing RESET for less than 3 seconds will cycle back through the color components. 75 2009 05+ Mustang (197) Owners Guide USA (fus)