2010 Ford Edge Owner Guide 3rd Printing - Page 127

Seating and Safety Restraints Memory seats and power mirrors (if equipped) This system allows automatic positioning of the driver seat and power mirrors to two programmable positions. The memory seat control is located on the driver's door. • To program position 1, move the driver seat and mirrors to the desired position using the associated controls. Press and hold button 1 for at least two seconds. A chime will sound confirming that a memory position has been set. • To program position 2, repeat the previous procedure using button 2. A memory seat position may be programmed at any time. To program the memory feature to a remote entry transmitter, refer to Remote entry system in the Locks and Security chapter. A programmed memory position can be recalled: • in any gearshift position if the ignition is not on. • only in P (Park) or N (Neutral) if the ignition is on. The memory positions are also recalled when you press your remote (unlock) control (if the transmitter is programmed entry transmitter to a memory position) or, when you enter a valid personal entry code that is programmed to a memory position. The mirrors will move to the programmed position and the seat will move to the easy entry position. The seat will move to the final position when the key is in the ignition (if easy entry feature is enabled). Easy entry/exit feature (if equipped) This feature automatically moves the driver's seat rearward 2 in. (5 cm) when: • the transmission is in N (Neutral) or P (Park) • the key is removed from the ignition The seat will move forward (to the original position) when: • the transmission is in N (Neutral) or P (Park) • the key is placed in the ignition 127