2010 Ford Expedition EL Owner Guide 3rd Printing - Page 111

Climate Controls Operating tips • To reduce fog build-up on the windshield during humid weather, place position. the air flow selector in the • To reduce humidity build-up inside the vehicle: do not drive with the engaged. system off or with recirculated air • Under normal weather conditions, do not leave the air flow selector in or with the system off when the A/C and recirculated air vehicle is parked. This allows the vehicle to "breathe" using the outside air inlet vents. • To improve the A/C cool down, drive with the windows slightly open for 2-3 minutes after start up or until the vehicle has been "aired out". • During extreme high ambient temperatures when idling stationary for extended periods of time in gear, it is recommended to run the A/C selected, turn off the rear A/C unit, reduce with recirculation mode blower fan speed from the highest setting and put the vehicle's transmission into the P (Park) position to continue to receive cool air from your A/C system. • For maximum cooling performance, (MAX A/C): In AUTO: Press AUTO control and set to desired temperature. (panel), A/C, and recirculated In Manual Override: Press the , set the temperature to 60°F (16°C) and the fan to the highest air blower setting. • Do not put objects under the front seats that will interfere with the airflow to the back seats. • Remove any snow, ice or leaves from the air intake area at the base of the windshield. To aid in side window defogging/demisting in cold weather: 1. Select . 2. Select A/C. 3. Adjust the temperature control to maintain comfort. 4. Set the fan speed to the highest setting. 5. Direct the outer instrument panel vents towards the side windows. To increase airflow to the outer instrument panel vents, close the vents located in the middle of the instrument panel. 111 2010 Expedition (exd) Owners Guide, 3rd Printing USA (fus)