2011 Ford E150 Cargo Owner's Manual - Page 69

Driver Controls Increasing speed while using speed control To increase the set speed: • Press and hold SET/ACCEL until you get to the desired speed, then release. You can also use SET/ACCEL to operate the tap-up function. Press and release SET/ACCEL to increase the vehicle set speed in 1 mph (1.6 km/h) increments. • Use the accelerator pedal to get to the desired speed. When the vehicle reaches that speed, press and release SET/ACCEL. Reducing speed while using speed control To reduce the set speed: • Press and hold COAST until you get to the desired speed, then release. You can also use COAST to operate the tap-down function. Press and release COAST to decrease the vehicle set speed in 1 mph (1.6 km/h) increments. • Press the brake pedal until the desired vehicle speed is reached, then press and release SET/ACCEL. Turning off speed control To turn off the speed control, press OFF or turn off the ignition. Note: When you turn off the speed control or the ignition, your speed control set speed memory is erased. STEERING WHEEL CONTROLS (IF EQUIPPED) SYNC system hands free control feature (if equipped) briefly to use the voice Press command feature. You will hear a tone and LISTENING will appear in the radio display. Press and to exit voice command. hold Press hold to activate phone mode or answer a phone call. Press and to end a call or exit phone mode. For further information on the SYNC system, refer to the SYNC supplement. 69 2010 Econoline (eco) Owners Guide, 3rd Printing USA (fus)