2011 Ford Expedition Owner Guide 1st Printing - Page 24

Instrument Cluster HOLD RESET FOR SYSTEM CHECK Press and hold the SELECT/RESET stem to start the system check when HOLD RESET FOR SYSTEM CHECK is displayed in the message center. For each of the monitored systems, the message center will indicate either an ok message or a warning message for two seconds. Pressing the SELECT/RESET stem cycles the message center through each of the systems being monitored. Note: Some systems show a message only if a condition is present. 1. OIL LIFE 2. CHARGING SYSTEM 3. WASHER FLUID LEVEL 4. DOOR/LIFTGATE/GLASS AJAR 5. BRAKE SYSTEM 6. TIRE PRESSURE 7. FUEL LEVEL (will only display if 50 miles or less to empty) 8. MYKEY DISTANCE (if programmed) 9. MYKEY(S) PROGRAMMED 10. ADMIN KEYS PROGRAMMED OIL LIFE This displays the remaining oil life. An oil change is required whenever indicated by the message center and according to the recommended maintenance schedule. USE ONLY RECOMMENDED ENGINE OILS. To reset the oil monitoring system to 100% after each oil change perform the following: 1. Press and release SETUP to display "OIL LIFE XXX% HOLD RESET = NEW". 2. Press and hold RESET for two seconds and release to reset the oil life to 100%. Note: To change oil life 100% value to another value, proceed to Step 3. 3. Once "OIL LIFE SET TO XXX%" is displayed, release and press RESET to change the Oil Life Start Value. Each release and press will reduce the value by 10%. UNITS ENG / METRIC Displays the current units English or Metric. 24 2011 Expedition (exd) Owners Guide, 1st Printing USA (fus)