2013 Ford Edge Owner Manual Printing 4 - Page 166

Seats 165 MEMORY FUNCTION (IF EQUIPPED) The memory control, located on the instrument panel, allows automatic positioning of the driver seat and 2 1 power mirrors to two programmable positions. Programming a Memory Position Note: You can program a memory position at any time. • To program position 1, move the memory features to the desired positions using the associated controls. Press and hold button 1 for at least two seconds. A chime will sound confirming that a memory position has been set. • To program position 2, repeat the previous procedure using button 2. Recalling a Memory Position You can recall a programmed memory position: • in any gearshift position if the ignition is not on. • only in position P or N if the ignition is on. Press the desired memory control to recall a memory position. Recalling a Memory Position with the Remote Control The memory positions are also recalled when you press unlock on your remote control (if the transmitter is programmed to a memory position) or, when you enter a valid personal entry code that is programmed to a memory position. If the easy entry feature is enabled, the seat will first move to the easy entry position. The seat will move to the final position when the key is in the ignition or when the push button start system (if equipped) is put in accessory mode or started. To program the memory feature to a remote control, see the Keys and Remote Control chapter. Easy Entry and Exit Feature (If Equipped) This feature automatically moves the driver's seat rearward 2 inches (5 centimeters) when: • the transmission is in position N or P 2013 Edge (edg) Owners Guide gf, 4th Printing, November 2012 USA (fus)