2013 Ford Edge Owner Manual Printing 4 - Page 80

Locks 79 To reset the power liftgate: 1. Disconnect the battery for 20 seconds then, reconnect the battery. 2. Manually close and fully latch the liftgate. 3. Power open the liftgate by using the remote control or the instrument panel button. SECURICODE™ KEYLESS ENTRY KEYPAD (IF EQUIPPED) You can use the keypad to: • lock or unlock the doors • recall memory features (if equipped) • enable and disable autolock and autounlock • program and erase user codes • arm and disarm the anti-theft alarm (if equipped). You can operate the keypad with the factory-set 5-digit entry code. This code is located on the owner's wallet card in the glove box and is available from an authorized dealer. You can also create up to five of your own 5-digit personal entry codes. Programming a Personal Entry Code To create your own personal entry code: 1. Enter the factory-set code. 2. Press the 1•2 on the keypad within five seconds. 3. Enter your personal 5-digit code. You must enter each number within five seconds of each other. 4. For memory recall feature, enter the sixth digit 1•2 to store driver 1 settings or 3•4 to store driver 2 settings. Note: Pressing 5•6, 7•8, or 9•0 keypad numbers as a sixth digit will not recall a driver memory setting. Note: The factory-set code cannot be associated with a memory setting. 5. The doors will lock and then unlock to confirm that programming is complete. You may also program a personal entry code through the MyFord Touch or MyLincoln Touch system. Refer to the MyFord Touch or MyLincoln Touch chapter. 2013 Edge (edg) Owners Guide gf, 4th Printing, November 2012 USA (fus)