2013 Ford Fiesta Owner Manual Printing 2 - Page 203

202 ENGINE OIL DIPSTICK Maintenance A. MIN B. MAX A B ENGINE OIL CHECK Note: Check the level before starting the engine. Note: Make sure that the level is between the MIN and MAX marks. 1. Make sure that your vehicle is on level ground. 2. Turn the engine off and wait 10 minutes for the oil to drain into the oil pan. 3. Remove the dipstick and wipe it with a clean, lint-free cloth. Replace the dipstick and remove it again to check the oil level. If the level is at the MIN mark, add oil immediately. Adding Engine Oil Note: Do not remove the filler cap when the engine is running. Note: Do not add engine oil further than the MAX mark. Oil levels above the MAX mark may cause engine damage. Only use oils certified for gasoline engines by the American Petroleum Institute (API). An oil with this trademark symbol conforms to the current engine and emission system protection standards and fuel economy requirements of the International Lubricants Specification Advisory Council (ILSAC), comprised of U.S. and Japanese automobile manufacturers. 1. Remove the filler cap. 2. Add engine oil that meets Ford specifications. See Capacities and Specifications for more information. 3. Replace the filler cap. Turn it until you feel a strong resistance. 2013 Fiesta (fie) Owners Guide gf, 2nd Printing USA (fus)