2014 Ford F150 SuperCrew Cab F-150 Raptor Supplement Printing 1 - Page 29

2014 Ford F150 SuperCrew Cab Manual

Page 29 highlights

Wheels and Tires • Proper suspension alignment is critical for maximum performance and optimal tire wear. If you notice uneven tire wear, have your alignment checked. When replacing tires, the only way to assure original performance is to use the original equipment tire. If a different tire is used, it should be the same size, speed rating and load rating. USING SNOW CHAINS The original equipment tires on your vehicle are not designed to be used with snow chains. If you will be operating your vehicle with snow chains, use a smaller tire and wheel combination as recommended in your Owner's Manual. • Tire Rotation Because your vehicle's tires perform different jobs, they often wear differently. To make sure your tires wear evenly and last longer, have them rotated. WHEELS Your vehicle is equipped with unique wheels matched to the tires. To avoid damage to your wheels: • Maintain proper tire pressure. See Tire Care (page 26). • Due to extreme tire/wheel width, this vehicle cannot be taken through an automatic car wash that uses mechanical tracks, as wheel damage may result. • When installing wheels, always torque lug nuts to specification with a torque wrench. • Inspect your wheels for damage on a regular basis. If you have a damaged wheel, replace it immediately. • In the event that you encounter an abnormally harsh impact, inspect the outer diameter of your wheels, both inside and out, for damage. E142548 The front tires are shown at the left of the illustration. Note: Your vehicle requires tire rotations every 5000 miles (8000 kilometers). If you notice that the tires wear unevenly, have them checked. Spare Tire and Wheel Your vehicle is equipped with an LT315/70R17 spare tire. The spare tire/wheel assembly has the same capability as the road tire/wheel assembly, but is not equipped with a tire pressure monitoring sensor. Optional Bead-Lock Compatible Wheel Note: SVT only recommends using bead-lock rings from Ford Racing, in conjunction with the OEM tire. Any other combination using this wheel could result in air loss or tire failure. Note: Converting the bead-lock compatible wheel to true bead-locks is for off-road use only. On road driving is not permitted. 27 F150 (TF6)

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41

Proper suspension alignment is critical
for maximum performance and
optimal tire wear. If you notice uneven
tire wear, have your alignment checked.
When replacing tires, the only way to
assure original performance is to use
the original equipment tire. If a different
tire is used, it should be the same size,
speed rating and load rating.
Tire Rotation
Because your vehicle’s tires perform
different jobs, they often wear differently.
To make sure your tires wear evenly and
last longer, have them rotated.
E142548
The front tires are shown at the left of the
illustration.
Note:
Your vehicle requires tire rotations
every 5000 miles (8000 kilometers). If you
notice that the tires wear unevenly, have
them checked.
Spare Tire and Wheel
Your vehicle is equipped with an
LT315/70R17 spare tire. The spare
tire/wheel assembly has the same
capability as the road tire/wheel assembly,
but is not equipped with a tire pressure
monitoring sensor.
USING SNOW CHAINS
The original equipment tires on your vehicle
are not designed to be used with snow
chains. If you will be operating your vehicle
with snow chains, use a smaller tire and
wheel combination as recommended in
your
Owner’s Manual
.
WHEELS
Your vehicle is equipped with unique
wheels matched to the tires. To avoid
damage to your wheels:
Maintain proper tire pressure. See
Tire
Care
(page 26).
Due to extreme tire/wheel width, this
vehicle cannot be taken through an
automatic car wash that uses
mechanical tracks, as wheel damage
may result.
When installing wheels, always torque
lug nuts to specification with a torque
wrench.
Inspect your wheels for damage on a
regular basis. If you have a damaged
wheel, replace it immediately.
In the event that you encounter an
abnormally harsh impact, inspect the
outer diameter of your wheels, both
inside and out, for damage.
Optional Bead-Lock Compatible
Wheel
Note:
SVT only recommends using
bead-lock rings from Ford Racing, in
conjunction with the OEM tire. Any other
combination using this wheel could result
in air loss or tire failure.
Note:
Converting the bead-lock compatible
wheel to true bead-locks is for off-road use
only. On road driving is not permitted.
27
F150 (TF6)
Wheels and Tires