2014 Ford F150 SuperCrew Cab F-150 Raptor Supplement Printing 1 - Page 34
2014 Ford F150 SuperCrew Cab Manual
Page 34 highlights
Capacities and Specifications Item Capacity Ford part name or equivalent 7 Ford part number / Ford specification Transmission fluid 6 12.4L (13.1 qt) Motorcraft MERCON LV ATF XT-10-QLV / MERCON LVXT-10QLVC (US); CXT10-LV12 (Canada) XL-12 (US); CXL-12 (Canada) / ESPM2C166-H Transfer case lubricant 1 1.4-1.5L (2.9-3.1 pt) Motorcraft Transfer Case Fluid Your engine has been designed to use Motorcraft motor oils or equivalent oil brands that meet Ford's specifications. It is also acceptable to use motor oils of the recommended viscosity grade that meet API SN requirements and displays the API Certification Mark for gasoline engines. 2 Do not use oils labeled with API SN service category unless the label also display the API certification mark. These oils do not meet the requirements of your vehicles engine and emissions system. Do not use supplemental engine oil additives. They are unnecessary and could lead to engine damage that is not covered by Ford's warranty. 3 Add the coolant type originally equipped in your vehicle. 4 Add 118 ml (4 fluid oz.) of Additive Friction Modifier XL-3 (US) / CXL-3 (Canada) or equivalent meeting Ford specification EST-M2C118-A for a complete refill of Torsen™ limited slip differential front axles. 5 Fill 6 millimeter to 14 millimeter (1/4 inch to 9/16 inch) below bottom of fill hole. Note: Your vehicle's rear axle is filled with a synthetic rear axle lubricant and is considered lubricated for life. These lubricants do not need to be checked or changed unless a leak is suspected, service is required or the axle assembly has been submerged in water. The axle lubricant should be changed any time the rear axle has been submerged in water. Note: Do not add Additive Friction Modifier to the rear axle. 6 Make sure the correct automatic transmission fluid is used. Transmission fluid requirements are indicated on the dipstick or on the dipstick handle. Check the container to verify the fluid being added is of the correct type. Refer to your scheduled maintenance information to determine the correct service interval. 7 Approximate dry fill capacity including transmission fluid cooling system, actual refill capacities will vary based on vehicle application and transmission fluid cooling system (for example: coolers size, cooling lines, auxiliary cooler capacities). The amount of transmission fluid and fluid level should be set by the indication on the dipstick's normal operating range. 32 F150 (TF6)