2015 Ford F450 Super Duty Crew Cab Owner Manual Printing 2 - Page 56

MyKey™ Note: You can clear or change your MyKey settings at any time during the same key cycle as you created the MyKey. Once you have switched the engine off, however, you will need an admin key to change or clear your MyKey settings. Press SETUP until PRESS RESET TO CLEAR MYKEY displays. 2. Press and release the RESET button. The display will show HOLD RESET TO CONFIRM CLEAR. 3. Press and hold the RESET button for two seconds until ALL MYKEYS CLEARED displays. If You Have a Type 2 Information Display: Access the main menu and select SETTINGS, then MYKEY. 2. Scroll to CLEAR ALL and press the OK button. 3. Hold the OK button until ALL MYKEYS CLEARED displays. 1. 1. CLEARING ALL MYKEYS You can clear all MyKeys within the same key cycle as you created the MyKey. If you switch your ignition off, however, you will need to use an admin key to clear your MyKeys. Note: When you clear your MyKeys, you remove all restrictions and return all MyKeys to their original admin key status at once. To clear all MyKeys of all MyKey settings, use the information display. There are two types of information displays, and their controls and messaging vary. To determine which type of display you have, you will need to reference another chapter. See General Information (page 83). If You Have a Type 1 Information Display: CHECKING MYKEY SYSTEM STATUS You can find information on programmed MyKey(s) using the information display control on the steering wheel. See Information Displays (page 83). To find information on a programed MyKey(s), press the left arrow button to access the main menu and scroll to: Message Description Settings MyKey Press the OK button. Press the OK button. Select one of the following: 53 Super Duty (), enUSA