1995 GMC Yukon Owner's Manual - Page 277

Tighten Clockwise Tightening Sequence I Tighten the nuts firmly in a criss-cross sequence as shown. Rotate the wheel wrench clockwise. For proper torque, see "Wheel Nut Torque" in the Index. Put the wheel trim back on. For vehicles with plastic wheel nut caps. tighten the caps until they are finger tight, then tighten them an additional one-half turn with the ratchet and wheel wrench. Remove any wheel blocks. Remember, the jack, jacking equipment and tire must be properly stored in their original storage position before you begin driving again. Thenext part, "Storing the Jack and Tire," will show you how. 5-39