1995 GMC Yukon Owner's Manual - Page 358

Fuse Block The fuse block access door is on the driver's side edge of the instrument panel. Pull off t.he cover to access the fuse block. You can remove fuses with a fuse extractor. The fuse extractor is mounted to the fuse block access door. To remove fuses if you don't have a fuse extractor. hold the end of the fuse between your thumb and index finger and pull straight out. Be sure to use the correct fuse. If you ever have a problem on the road and don't have a spare fuse. you can "borrow" oneof the correct value. Just pick some featureof your vehicle that you can get along without-like the radio or cigarette lighter-and use its fuse, if it is of the value you need. Replace i t as soon as you can. See "Fuses and Circuit Breakers" in the Index for more information. Specification Charts Replacement Parts Replacement part numbers listed in this section are based on the latest information available at the time of printing, and are subject to change. If a part listed in this manual is not the same as the part used in your vehicle when it was built, or if you have any questions, please contact your GM truck dealer. Engine Identification- Gasoline Engines Engine T Pe Y VIN Code Fuel System Emissions 7.4L V8 N TB I? HD '#LightDuty Emissions with 8,500 Ibs. ( 3 850 Kg) GVWR and below. '$*HeavyDuty Emissions over 8,500 lbs. ( 3 850 Kg) GVWR. ?Throttle Body In-jection