1995 GMC Yukon Owner's Manual - Page 96

0 THIRD GEAR (3),FOUKTH GEAR (4) and FIFTH GEAR ( 5 ) Shift into THIRD GEAR (3), FOURTH GEAR (4) and FIFTH GEAR ( 5 ) the same way you do for SECOND GEAR (2). Slowly let up on the clutch pedal a s you press the accelerator pedal. 0 To Stop - Let up on the accelerator pedal and press the brake pedal. Just before the vehicle stops, press the clutch pedal and the brake pedal. and shift to NEUTRAL (N). NEUTRAL (N) - Use this position when you start or idle your engine. REVERSE (R) To back up, first press down the clutch pedal. Wait about 5 seconds for the internal parts to stop spinning and then, shift into REVERSE (R). Let up on the clutch pedal slowly while pressing the accelerator pedal. 0 0 NOTICE: Shift to REVERSE (R) only after your vehicle is stopped. Shifting to REVERSE (R)while your vehicleis moving could damage your transmission. Also, use REVERSE (R), along with the parking brake, when turning off your engine and parking your vehicle. SHIFT Light I f you have a manual transmission: you will have a SHIFT light. This light will show you when to shift to the next higher gear for best fuel economy. When this light comes on, you can shift to the next higher gear if weather. road and traffic conditions let you. For the best fuel economy, accelerate slowly and shift when the light comes on. 2-24