1995 GMC Yukon Owner's Manual - Page 278

Stowing the Tire &Door Utility Model For a under-body spare tire carrier, stow the flat tire under the rear of the vehicle in the spare tire carrier. To stow the flat tire: 1 , Put the tire on the ground at the rear of the vehicle with the valve stem pointed down. 2. Pull the wheel retainer through the wheel opening. 3. Attach the ratchet to the wheel wrench with the UP marking facing you. 4. Put the other end of the wheel wrench through the rear bumper access hole, located at the passenger side edge of the license plate. Be sure the wheel wrench connects into the hoist shaft. 5. Turn the ratchet clockwise to raise the tire. Keep turning the ratchet until the tire is all the way up. You will hear two "clicks" when the tire is secure. Pull on the tire to make sure it is tightly secured. Stowing the Jack and Jacking Tools Put the tools into the storage box and close it tightly. Fit the storage box on the bracket with the bolt through the box. Put the jack onto the box. Be sure the jack points in the right direction as shown illustrations earlier this part. Secure the in the in emergency gloves, if your vehicle has them, to the jack using the provided strap. Slide the retainer over the bolt onto the jack and put the wing nut on. Turn the nut clockwise until it is tight against the retainer. Replace the jack storage cover. if your vehicle has one, by simply reversing the removal procedure described earlier. Stowing the Tire 2-Door Utility Model and Suburban Stow the flat tire in the cargo area of the vehicle secured in the tire carrier. To stow the flat tire: I . Put the cover back on the tire if your vehicle has one. 2. Put the flat tire in the cargo area of the vehicle, over the retainer bolt. 3. Slide the adapter onto the bolt in the proper location for your model and put the wing nut on. 4. Turn the wing nut clockwise until the adapter is tight and secure against the wheel. 5. Close the tire cover, if you have one. 5-40