1995 GMC Yukon Owner's Manual - Page 330

3. Unplug the electrical connector. 4. Turn the bulb to the left and remove it. 5. Put the new bulb in the lens assembly and turn it to the right until it is tight. 6. Plug in the electrical connector. 7. Put the headlamp lens assembly back into the vehicle. Install and tighten the two screws. Front Parkingnurn Signal Lamps with Sealed Beam Headlamps I . Remove the two screws at the inside edge of the parking/turn signal lamp assembly. 2. Remove the lamp assembly by swinging it out from the inside edge and sliding it out at the outside edge. 6-48