1995 GMC Yukon Owner's Manual - Page 331

out of the lamp assembly. 5 . Push in gently on the bulb, turn it to the left and remove it from the socket . 6. Put the new bulb in the socket, gently press in on the bulb and turn it to the right until it is tight. '7. Put the socket back into the lamp assembly and turn it to the right until it locks. 8. Put the parkinghurn signal lamp assembly back into the vehicle and tighten the screws. Front Parkingnurn Signal Lamps with Composite Headlamps I . Remove the screws and take out the parkinghurn signal lamp assembly. 2. Squeeze the tab on the side of the lamp socket while turning the socket to the left. 6-49