1995 GMC Yukon Owner's Manual - Page 381

Maintenance Schedule I - Gasoline Engines With Light Duty Emissions 3,000 Miles ( 000 km) 5 0 Change engine oil and filter (or every 3 months, whichever occurs first). An Ewissior~Control Service. 0 Lubricate the front suspension, king pin bushings, steering linkage, transmission shift linkage, transfer case shift linkage, parking brake cable guides, rear driveline center splines,front axle propshaft splines, brake pedal springs and clutch pedal springs. Ball joints and king pin bushings should not be lubricated unless their temperature is 10" F (-12" C), or higher. When weather is cold, let the ball joints and king pin bushings warm up before lubrication or they could be damaged. Perform each of the listed lubrication service items at this mileage interval (or every 6 months, whichever occurs first). constant velocity joints and axle seals for leaking. :l::i: 0 Check rear/front axle fluid level and add fluid as needed. Check DATE ACTUAL MILEAGE SERVICED BY: I b 6,000 Mi/es (10 000 km) 0 Change engine oil and filter (or every 3 months, whichever occurs first). An Emission Control .%\-\?ice. 0 L.ubricate the front suspension, king pin bushings, steering linkage, transmission shift linkage, transfer case shift linkage, parking brake cable guides, rear driveline center splines, front axle propshaft splines, brake pedal springs and clutch pedal springs. Ball joints and king pin bushings should not be lubricated unless their temperature is 10" F (-12" C), or higher. When weather is cold, let the ball joints and king pin bushings warm up before lubrication or they could be damaged. Perform each of the listed lubrication service items at this mileage interval (or every 6 months, whichever occurs first). 7-13