1995 GMC Yukon Owner's Manual - Page 390

Maintenance ScheduleI - Gasoline Engines With Light Duty Emissions 42,000Miles (70 000 km) 0 Change engine oil and filter (or every 3 months, whichever occurs first). A HEnIissiol1 Corztrol Service. 0 Lubricate the front suspension, king pin bushings, steering linkage, transmission shift linkage, transfer case shift linkage, parking brake cable guides, rear driveline center splines, front axle propshaft splines, brake pedal springs and clutch pedal springs. Ball joints and king pin bushings should not be lubricated unless their temperature is 10" F (-12" C), or higher. When weather is cold, let the ball joints and king pin bushings warm up before lubrication or they could be damaged. Perform each of the listed lubrication service items at this mileage interval (or every 6 months. whichever occurs first). 0 Check redfront axle fluid level and add fluid a s needed. Check constant velocity joints and axle seals for leaking.** 0 Rotate tires. See "Tire Inspection and Rotation" in the Index for proper rotation pattern and additional information. I DATE I ACTUALMILEAGE I SERVICED BY: I 45,000Miles (75 000 km) 17 Change engine oil and filter (or every 3 months, whichever occurs first). An Emission Cofltrd Servic4. 0 Lubricate the front suspension, king pin bushings, steering linkage, transmission shift linkage, transfer case shift linkage, parking brake cable guides,rear driveline center splines, front axle propshaft splines, brake pedal springs and clutch pedal springs. Ball joints and king pin bushings should not be lubricated unless their temperature is 10" F (-12" C), or higher. When weather is cold, let the ball joints and king pin bushings warm up before lubrication or they could be damaged. Perform each of the listed lubrication service items at this mileage interval (or every 6 months, whichever occurs first). 7-22