1995 GMC Yukon Owner's Manual - Page 397

Maintenance Schedule II - Gasoline Engines With Light Duty Emissions (Corltirlueci) 17 [? Check readfront axle fluid level and add fluid as needed. Check constant velocity joints and axle seals for leaking2:": For 2-Wheel Drive vehicles only: Clean and repack the front wheel bearings (or at each brake relining. whichever occurs first). 22,500 Miles (37500 km) 0 Change engine oil and filter (or every 12 months, whichever occurs first). An Emissiot2 Corltr-01 Serviw. 0 Lubricate the front suspension. king pin bushings, steering linkage. transmission shift linkage. transfer case shift linkage, parking brake cable guides, rear driveline center splines,front axle propshaft splines, brake pedal springs and clutch pedal springs. Ball .joints and king pin bushings should not be lubricated unless their temperature is IO" F (-12" C), or higher. When weather is cold. let the ball joints and king pin bushings warm up before lubrication or they could be damaged. Perform each of the listed lubrication service items at this mileage interval (or every 12 months. whichever occurs first). 0 Check readfront axle fluid level and add fluid as needed. Check constant velocity joints and axle seals for leaking.:'::': 0 Rotate tires. See "Tire Inspection and Rotation" i n the Index for proper rotation pattern and additional information. L DATE ACTUAL MILEAGE SERVICED BY: 7-29