1995 GMC Yukon Owner's Manual - Page 399

Maintenance Schedule II - Gasoline Engines With Light Duty Emissions 37,500 Miles (62 500 km) 0 Change engine oil and filter (or every I2 months, whichever occurs first). A H Ernissiorl Control Scr\ic*o. 0 Lubricate the front suspension, king pin bushings, steering linkage, transmission shift linkage, transfer case shift linkage. parking brake cable guides, rear driveline center splines. front axle propshaft splines, brake pedal springs and clutch pedal springs. Ball joints and king pin bushings should not be lubricated unless their temperature is IO" F (-12" C). or higher. When weather is cold. let the ball joints and king pin bushings warm up before lubrication or they could be damaged. Perform each of the listed lubrication service i t e m at this mileage interval (or every I2 months, whichever o c c ~ ~first). rs 0 Check rear/front axle fluid level and add fluid as needed. Check constant velocity joints and axle seals for leaking.'!''1' 0 Rotate tires. See "Tire Inspection and Rotation" i n the Index for proper I rotation pattern and additional information. DATE I ACTUAL MIL'AGE I SERVICED BY: I 45,000 Miles (75 000 km) 0 Change engine oil and filter (or every 12 months, whichever occurs first). An Emission Control Servicv. Lubricate the front suspension, king pin bushings, steering linkage, transmission shift linkage, transfer case shift linkage, parking brake cable guides. rear driveline center splines, front axle propshaft splines. brake pedal springs and clutch pedal springs. Ball joints and king pin bushings should not be lubricated unless their temperature is IO" F (-12" C), or higher. When weather is cold, let the ball joints and king pin bushings warm up before lubrication or they could be damaged. Perform each of the listed lubrication service i t e m a t this mileage interval (or every 12 months. whichever occurs first). (Continued) 7-3 1