1995 GMC Yukon Owner's Manual - Page 439

I Maintenance Schedule I - Diesel Engines I 35,000 Miles (56 000 km) 0 Change engine oil and filter (or every 3 months, whichever occurs first). A n Er1uksior? Control Service. Lubricate the front suspension, king pin bushings. steering linkage, transmission shift linkage, transfer case shift linkage, parking brake cable guides, rear driveline center splines, front axle propshaft splines, brake pedal springs and clutch pedal springs. Ball joints and king pin bushings should not be lubricated unless their temperature is 10" F (-12" C), or higher. When weather is cold, let the ball joints and king pin bushings warm up before lubrication or they couldbe damaged. Perform each ofthe listed lubrication service items at this mileage interval (or every I2 months, whichever o c c ~ ~first). rs 0 Check rearlfront axle fluid level and add fluid as needed. Check constant velocity joints and axle seals for leaking. 'i:'i: DATE SERVICED BY: ACTUAL MILEAGE J 37,500 Miles (60 000 km) Change engine oil and filter (or every 3 months, whichever occurs first). A n Ernission Cm1tr.d Serviw. Lubricate the front suspension, king pin bushings, steering linkage, transmission shift linkage, transfer case shift linkage, parking brake cable guides, rear driveline center splines,front axle propshaft splines. brake pedal springs and clutch pedal springs. Ball joints and king pin bushings should not be lubricated unless their temperature is 10" F (-1 2" C), orhigher. When weather is cold, let the ball joints and king pin bushings warm up before lubrication or they could be damaged. Perform each of the listed lubrication sewice i t e m at this mileage S interval (or every 12 months, whichever O C C L I ~first). 0 Rotate tires. See "Tire Inspection and Rotation" in the Index for proper rotation pattern and additional information. See "Tires" in the Index. DATE MILEAGE SERVICED BY: ACTUAL 7-7 1