1995 GMC Yukon Owner's Manual - Page 450

1 Maintenance Schedule II - Diesel Engines 15,000 Miles (24000 km) 0 Change engine oil and filter (or every 3 months, whichever occurs first). An Emission Colztr-01Set-vice. Lubricate the front suspension, king pin bushings, steering linkage, transmission shift linkage, transfer case shift linkage, parking brake cable guides, rear driveline center splines, front axle propshaft splines, brake pedal springs and clutch pedal springs. Ball joints and king pin bushings should not be lubricated unless their temperature is 10" F (-12" C), or higher. When weather is cold, let the ball joints and king pin bushings warm up before lubrication or they could be damaged. Perform each of the listed lubrication service items at this mileage interval (or every 12 months, whichever occurs first). 0 Rotate tires. See "Tire Inspection and Rotation" in the Index for proper ro'tation pattern and additional information. See "Tires" in the Index. 0 Check readfront axle fluid level and add fluid a s needed. Check constant velocity joints and axle seals for leaking. ';'* DATE ACTUAL MILEAGE SERVICED BY: 20,000 Miles (32000 km) 0 Change engine oil and filter (or every 3 months, whichever occurs first). An Emission Cor~trol Service. 0 Lubricate the front suspension, king pin bushings, steering linkage, transmission shift linkage, transfer case shift linkage, parking brake cable guides, rear driveline center splines,front axle propshaft splines, brake pedal springs and clutch pedal springs. Ball joints and king pin bushings should not be lubricated unless their temperature is 10" F (-12" C), or higher. When weather is cold, let the ball joints and king pin bushings warm up before lubrication or they could be damaged. Perform each of the listed lubrication service items at this mileage interval (or every 12 months, whichever occurs first). (Co~ztinu~d) 7-82