1995 Honda Prelude Owner's Manual - Page 170

Lights 5. Push the bulb holder into the side marker assembly and turn it clockwise until it locks. 6. Test the side marker to make sure the new bulb is working. 7. Put the side marker assembly into the bumper. Make sure the tab on the side marker assembly fits into the bumper slot. Tighten the mounting screw. BULB SCREW BULB HOLDER Replacing a Front Turn Signal Light Bulb TURN SIGNAL ASSEMBLY 1. Use a Phillips-head screwdriver to loosen the turn signal assembly's mounting screw. 2. Remove the turn signal assembly from the bumper. 3. Remove the bulb holder from the turn signal assembly by turning it counterclockwise. 4. Remove the burned out bulb from the socket by pushing it in and turning counterclockwise until it unlocks. Install the new bulb. Maintenance