1995 Honda Prelude Owner's Manual - Page 47

Steering Wheel Controls Changing the Set Speed You can increase the set cruising speed in either of two ways: Press and hold the accel/ RESUME button. The car will accelerate slowly. When you reach the desired cruising speed, release the button. accel/ RESUME SET/decel You can decrease the set cruising speed in either of two ways: Press and hold the SET/decel button. The car will decelerate. Release the button when you reach the desired speed. Tap the brake or clutch pedal lightly with your foot. The CRUISE CONTROL light on the instrument panel will go out. When the car slows to the desired speed, press the SET/decel button. The car will then maintain the desired speed. Push on the accelerator pedal. Accelerate to the desired cruising speed and press the SET/decel button. 3. Press and hold the SET/decel button on the steering wheel until the CRUISE CONTROL light on the instrument panel comes on. This shows the system is now activated. The set speed may vary slightly, particularly on hills. CONTINUED Instruments and Controls