1995 Honda Prelude Owner's Manual - Page 174

Lights Replacing a Rear License Bulb 4. Turn on the parking lights and check that the new bulb is working. 5. Reinstall the cover and the lens. Put the license light assembly in place. Reinstall the two screws and tighten them securely. Replacing a Ceiling Light Bulb 1. Remove the lens by carefully prying on the edge of the lens in the middle with a fingernail file or a small flat-tip screwdriver. Do not pry on the edge of the housing around the lens. 2. Remove the bulb by pulling it straight out of its metal tabs. 3. Push the new bulb into the metal tabs. Snap the lens back in place. 1. Remove the two screws and remove the license light assembly. 2. Remove the lens from the rubber seal and the metal cover. 3. Pull the bulb straight out of its socket. Push the new bulb in until it bottoms in the socket. Maintenance