2000 Honda Accord Owner's Manual - Page 254
2000 Honda Accord Manual
Page 254 highlights
Lights Replacing Rear Bulbs (in Fenders) 4. Pull the bulb straight out of its socket. Push the new bulb straight into the socket until it bottoms. 5. Reinstall the socket into the light assembly by turning it clockwise until it locks. 6. Test the lights to make sure the new bulb is working. 7. Reinstall the trunk lining. Make sure it is installed under the edge of the trunk seal. 2. Determine which of the two bulbs is burned out: stop/taillight or turn signal. 3. Remove the socket by turning it one-quarter turn counterclockwise. 8. Put the fastener in the hole on the side of the trunk lining and push on the center until it locks (the center is flush with the head). FASTENER 1. Open the trunk. Remove the fastener on the side of the trunk lining by turning it counterclockwise with a coin. Pull the lining back. Maintenance