2000 Honda Accord Owner's Manual - Page 59

Gauges Maintenance Required Indicator SELECT/RESET BUTTON Your dealer will reset this indicator after completing the scheduled maintenance. If this maintenance is done by someone other than your Honda dealer, reset the indicator as follows. 1. Turn off the engine. 2. Press and hold the select/reset button in the instrument panel, then turn the ignition switch ON (II). MAINTENANCE REQUIRED INDICATOR This indicator reminds you that it is time to take your car in for scheduled maintenance. Refer to the Maintenance Schedules for Normal and Severe Driving Conditions on pages 198 - 202. For the first 6,000 miles (9,600 km) after the Maintenance Required Indicator is reset, it will come on for two seconds when you turn the ignition switch ON (II). Instruments and Controls Between 6,000 miles (9,600 km) and 7,500 miles (12,000 km) this indicator will light for two seconds when you first turn the ignition switch ON (II), and then flash for ten seconds. If you exceed 7,500 miles (12,000 km) without having the scheduled maintenance performed, this indicator will remain on as a constant reminder. 3. Hold the buttons for about ten seconds, until the indicator resets.