2014 Honda CR-V 2014 CR-V Owner's Manual - Page 291

uu Replacing Light Bulbs u Fog Light Bulbs * Hold-down Wire 5. Reinstall the hold-down wire. Hook the end of the wire on the knob in the slot. u You can see if the hold-down wire is in the right place from the inspection window. 6. Reinstall the rubber weather seal. 7. Insert the coupler into the connector of the bulb. Inspection Window Fog Light Bulbs * When replacing, use the following bulbs. Fog Light: 55W (H11) Clip Maintenance 1 Fog Light Bulbs * NOTICE 1. Remove the clip using a flat-tip screwdriver, and push up the under cover. Halogen bulbs get very hot when lit. Oil, perspiration, or a scratch on the glass can cause the bulb to overheat and shatter. The fog lights are halogen bulbs. When replacing a bulb, handle it by its plastic case, and protect the glass from contact with your skin or hard objects. If you touch the glass, clean it with denatured alcohol and a clean cloth. 290 * Not available on all models