2014 Honda CR-V 2014 CR-V Owner's Manual - Page 340

uu Fuses u Inspecting and Changing Fuses Inspecting and Changing Fuses Blown Fuse Combined Fuse 1. Turn the ignition switch to LOCK (0 . Turn headlights and all accessories off. 2. Remove the fuse box cover. 3. Check the large fuse in the engine compartment. u If the fuse is blown, use a Phillips-head screwdriver to remove the screw and replace it with a new one. 4. Inspect the small fuses in the engine compartment and the vehicle interior. u If there is a burned out fuse, remove it with the fuse puller and replace it with a new one. 1 Inspecting and Changing Fuses NOTICE Replacing a fuse with one that has a higher rating greatly increases the chances of damaging the electrical system. Replace fuse with a spare fuse of the same specified amperage. Confirm the specified amperage using the charts on P. 337 to 338. Handling the Unexpected Use the charts to locate the fuse in question and conform the specific amperage on the fuse label. 2 Fuse Locations P. 337 There is a fuse puller on the back of the engine compartment fuse box cover. Fuse Puller 339