2014 Honda CR-V 2014 CR-V Owner's Manual - Page 70

uu Indicators u Indicator Name ● On/Blinking Comes on when you turn the ignition switch to ON (w , and goes off when the engine starts, or after several seconds if the engine did not start. If "readiness codes" have not been set, it blinks five times before it goes off. Comes on if there is a problem with the emissions control systems. Blinks when a misfire in the engine's cylinders is detected. ● Explanation Readiness codes are part of the on board diagnostics for the emissions control systems. 2 Testing of Readiness Codes P. 349 ● Malfunction Indicator Lamp ● ● ● Comes on while driving - Have your vehicle checked by a dealer. Blinks while driving - Stop in a safe place where there are no flammable objects. Stop the engine for 10 minutes or more, and wait for it to cool down. Then, take your vehicle to a dealer. 2 If the Malfunction Indicator Lamp Comes On or Blinks P. 334 Instrument Panel ● Charging System Indicator ● Comes on when you turn the ignition switch to ON (w , and goes off when the engine starts. Comes on when the battery is not charging. ● Comes on while driving - Turn off the heating and cooling system */climate control system * and rear defogger to reduce electricity consumption. 2 If the Charging System Indicator Comes On P. 333 Indicates current the shift lever position. (d indicator: ● Comes on for a few seconds when you turn Shift Lever the ignition switch to ON (w , then goes off. Position Indicator ● Comes on when you press the (d button while the shift lever is in (D . ● 2 Shifting P. 243 * Not available on all models Continued 69