2015 Jeep Grand Cherokee User Guide - Page 29

GETTING STARTED Memory Seat The memory seat feature allows you to set two different driver seating positions (excluding lumbar position), outside mirrors, radio station preset settings and tilt/telescoping steering column position (if equipped). The memory seat buttons are located on the driver's door panel. To set a memory position: 1. Cycle the vehicles ignition to the ON position. 2. Adjust all memory profile settings. 3. Press and release the S (SET) button. 4. Press and release the 1 or 2 button within five seconds. NOTE: Before programming your RKE transmitters you must select the "Personal Settings Linked To Key Fob" feature through the Uconnect® system. Refer to "Uconnect® Settings " in "Understanding Your Instrument Panel" in the Owner's Manual on the DVD for further details. To program a Key Fob to the memory position: 1. Cycle the vehicles ignition to the OFF position. 2. Select the desired memory profile 1 or 2. 3. Once the profile has been recalled, press and release the SET (S) button on the memory switch. 4. Within five seconds, press and release button (1) or (2) accordingly. "Memory Profile Set" (1 or 2) will display in the instrument cluster. 5. Press and release the LOCK button on the RKE transmitter within 10 seconds. NOTE: To recall the saved positions, press 1 or 2 on the memory switch or press UNLOCK on the programmed RKE transmitter. Memory Seat Buttons 27