2015 Jeep Grand Cherokee User Guide - Page 41

OPERATING YOUR VEHICLE High Beam Operation Push the lever forward to activate the high beams. Pull the lever toward you for flash to pass. NOTE: For safe driving, turn off high beams when oncoming traffic is present to prevent headlight glare and as a courtesy to other motorists. Front Wipers Intermittent, Low And High Operation • Rotate the end of the lever to the first detent position for one of four intermittent settings, the second detent for low wiper operation and the third detent for high wiper operation. Washer Operation • Push inward on the end of the lever and hold for as long as spray is desired. Mist • Rotate the end of the lever downward when a single wipe is desired. NOTE: The mist feature does not activate the washer pump; therefore, no washer fluid will be sprayed on the windshield. The wash function must be activated in order to spray the windshield with washer fluid. Rain Sensing Wipers This feature senses moisture on the vehicles windshield and automatically activates the wipers for the driver when the switch is in the intermittent position. • Rotate the end of the lever to one of four settings to activate this feature and adjust sensitivity. This feature can be activated/deactivated using the Uconnect® system screen. Refer to the "Programmable Features" under the "Electronics" section in this guide. Refer to the Owner's Manual on the DVD for further details. Rear Wiper Rear Wiper Operation Rotate the center portion of the lever forward to the first detent for intermittent operation and to the second detent for rear wiper operation. Rear Washer Operation Rotate the center portion of the lever past the second detent to activate the rear washer. 39