2002 Mazda 626 Owner's Manual - Page 105
2002 Mazda 626 Manual
Page 105 highlights
J94S.book Page 25 Saturday, June 23, 2001 1:04 PM Driving Your Mazda Warning/Indicator Lights and Beeps M Brake System Warning Light WARNING Brake Warning Light: Driving with the brake system warning light on is dangerous. It indicates that your brakes may not work at all or that they could completely fail at any time. If this light remains on, have the brakes inspected immediately. Don't drive with this light on, and contact an Authorized Mazda Dealer to have the brakes inspected as soon as possible. This warning has the following functions: Parking brake warning The light comes on when the parking brake is applied with the ignition switch in the START or ON position. It goes off when the parking brake is fully released. Low brake fluid level warning If the light stays on after the parking brake is fully released, you may have a brake problem. Drive to the side of the road and park off the right-of-way. You may notice that the pedal is harder to push or that it may go closer to the floor. In either case, it will take longer to stop the vehicle. 1. With the engine stopped, check the brake fluid level immediately and add fluid as required (page 8-15). 2. After adding fluid, check the light again. If the warning light remains on, or if the brakes do not operate properly, do not drive the vehicle. Have it towed to an Authorized Mazda Dealer. Even if the light goes off, have your brake system inspected as soon as possible. M Seat Belt Warning Light/Beep If the driver's seat belt is not fastened when the ignition switch is turned to the ON position, a beep will sound for about 6 seconds and the seat belt warning light will remain on until the belt is fastened. If the system does not operate correctly, consult an Authorized Mazda Dealer. 5-25 Form No. 8Q50-EA-01G