2002 Mazda 626 Owner's Manual - Page 173

J94S.book Page 13 Saturday, June 23, 2001 1:04 PM In Case of an Emergency Emergency Starting 1. Make sure the booster battery is 12 V and that its negative terminal is grounded. 2. If the booster battery is in another vehicle, don't allow the vehicles to touch. Turn off the engine of the vehicle with the booster battery and all unnecessary electrical loads in both vehicles. 3. Connect the jumper cables in the exact sequence as in the illustration. • Connect one end of a cable to the positive terminal on the discharged battery (1). • Attach the other end to the positive terminal on the booster battery (2). • Connect one end of the other cable to the negative terminal of the booster battery (3). • Connect the other end to a solid, stationary, exposed metallic point (for example, the engine hanger) away from the discharged battery (4). Discharged battery Discharged battery (+) (+) Jumper cables (-) Connect cables in numerical order Booster and disconnect in battery reverse order. 2.5-liter engine WARNING Connecting to Negative Terminal: Connecting the end of the second cable to the negative ( ) terminal of the discharged battery is dangerous. A spark could cause the gas around the battery to explode and injure someone. Connect the cable to a point away from the battery. Connecting Jumper Cable to a Moving Part: Connecting a jumper cable near or to a moving part is dangerous. The cable could get caught when the engine starts and cause serious injury. Never connect a jumper cable to or near any part that moves. 4. Start the engine of the booster vehicle and run it a few minutes. Then start the engine of the other vehicle. 5. When finished, carefully disconnect the cables in the reverse order described in Step 3. Jumper cables (-) Connect cables in Booster numerical order battery and disconnect in reverse order. 2.0-liter engine 7-13 Form No. 8Q50-EA-01G