2002 Mazda Miata MX-5 Owner's Manual - Page 92

J07L_8Q42-EA-01F.book Page 14 Tuesday, March 5, 2002 3:14 PM Driving Your Mazda Starting and Driving M Activation/Deactivation To activate the system, push the CRUISE MAIN switch. To deactivate the system, push the switch again. Indicator light M To Set Speed 1. Turn on the CRUISE MAIN switch. 2. Accelerate to the desired speed, which must be more than 40 km/h (25 mph). 3. Turn the control knob to SET/COAST and release it at the speed you want. Release the accelerator at the same time. Control knob WARNING Cruise Main Switch: Leaving the CRUISE MAIN switch on when not using the cruise control is dangerous as it may be switched on accidentally. This could result in loss of vehicle control. Keep the CRUISE MAIN switch off when cruise control is not in use. Don't continue to hold the knob. Until you release it, speed will continue to drop (unless you continue to accelerate) and you'll miss the desired speed. NOTE • The SET function can't be activated until about 2 seconds after the CRUISE MAIN switch has been engaged. • On a steep grade, the vehicle may momentarily slow down going up or speed up while going down. 5-14 Form No. 8Q42-EA-01F