2003 Mazda B2300 Owner's Manual - Page 222
2003 Mazda B2300 Manual
Page 222 highlights
Maintenance and Specifications 2. Visually inspect the fluid level. 3. If necessary, add brake fluid from a clean un-opened MAX container until the level reaches MAX. Do not fill above this line. 4. Use only a DOT 3 brake fluid certified to meet Mazda specification . Refer to Lubricant specifications in this chapter. WARNING: Brake fluid is toxic. If brake fluid contacts the eyes, flush eyes with running water for 15 minutes. Seek medical attention if irritation persists. If taken internally, drink water and induce vomiting. Seek medical attention immediately. WARNING: If you use a brake fluid that is not DOT 3, you will cause permanent damage to your brakes. WARNING: Do not let the reservoir for the master cylinder run dry. This may cause the brakes to fail. CLUTCH FLUID (IF EQUIPPED) Check the fluid level. Refer to the service maintenance section for the service interval schedules. During normal operation, the fluid level in the clutch reservoir should remain constant. If the fluid level drops, refill the fluid level to the step in the reservoir. Use only a DOT 3 brake fluid designed to meet Mazda specification. Refer to Lubricant Specifications in this chapter. WARNING: Brake fluid is toxic. If brake fluid contacts the eyes, flush eyes with running water for 15 minutes. Seek medical attention if irritation persists. If taken internally, drink water and induce vomiting. Seek medical attention immediately. 222