2003 Mazda B2300 Owner's Manual - Page 234

Maintenance and Specifications Fluid Rear axle lubricant5 Mazda Part Name Mazda SAE 80W-90 Premium Rear Axle Lubricant Ultra-Clear Windshield Washer Concentrate Application All Capacity 2.4-2.5L (5.0-5.3 pints) Windshield washer fluid All 2.6L (2.75 quarts) 1 Ensure the correct automatic transmission fluid is used. Transmission fluid requirements are indicated on the dipstick or on the dipstick handle. MERCON and MERCON V are not interchangeable. DO NOT mix MERCON and MERCON V. Refer to the service maintenance section to determine the correct service interval. Service refill capacity is determined by filling the transmission to the bottom of the filler hole with the vehicle on a level surface. Indicates only approximate dry-fill capacity. Some applications may vary based on cooler size and if equipped with an in-tank cooler. The amount of transmission fluid and fluid level should be set by the indication on the dipstick's normal operating range. Add the coolant type originally equipped in your vehicle. DO NOT MIX different colors or types of coolant. DO NOT USE Extended Life Engine Coolant (orange in color). Refer to Adding engine coolant in this chapter. 5 4 3 2 Traction-Lok axles use 2.2-2.4L (4.75-5.0 pints) of rear axle lubricant. Add 118 ml (4 oz.) of Additive Friction Modifier meeting Mazda specifications for complete refill of Traction-Lok axles. Service refill capacities are determined by filling the rear axle 6 mm to 14 mm (1/4 inch to 9/16 inch) below the bottom of the filler hole. 234