2010 Mazda CX-9 Owner's Manual - Page 193
2010 Mazda CX-9 Manual
Page 193 highlights
CX-9_8AU2-EA-09G_Edition1 Page193 Wednesday, July 8 2009 12:7 AM Black plate (193,1) Driving Your Mazda Starting and Driving CAUTION Do not rely on the TCS to maintain constant control of the vehicle under severe or maximum handling conditions. If the TCS operates frequently due to severe driving conditions, the TCS may stop operating to protect the brakes from overheating. After the brakes have cooled down, the TCS resumes normal operation. qTCS OFF Indicator Light qTCS/DSC Indicator Light This indicator light stays on for a few seconds when the ignition switch is turned to the ON position. It also illuminates when the TCS OFF switch is pressed and TCS is switched off. Refer to TCS OFF Switch on page 5-24. If the light remains illuminated and the TCS is not switched off, take your vehicle to an Authorized Mazda Dealer. The dynamic stability control may have a malfunction. NOTE If the TCS/DSC indicator light and the TCS OFF indicator light remain illuminated even after turning the ignition switch from ON to LOCK, and back to ON, attempt the procedure again. If this still does not resolve the issue, consult an Authorized Mazda Dealer. This indicator light stays on for a few seconds when the ignition switch is turned to the ON position. If the TCS or DSC is operating, the indicator light flashes. If the light stays on, the TCS, DSC or the brake assist system may have a malfunction and they may not operate correctly. Take your vehicle to an Authorized Mazda Dealer. NOTE l l l In addition to the indicator light flashing, a slight lugging sound will come from the engine. This indicates that the TCS is operating properly. On slippery surfaces, such as fresh snow, it will be impossible to achieve high rpm when the TCS is on. The brake assist system does not operate while the TCS/DSC indicator light is illuminated. 5-23 Form No.8AU2-EA-09G