2010 Mazda CX-9 Owner's Manual - Page 504
2010 Mazda CX-9 Manual
Page 504 highlights
CX-9_8AU2-EA-09G_Edition1 Page504 Wednesday, July 8 2009 12:11 AM Black plate (504,1) Maintenance and Care Owner Maintenance 2. Turn the screws counterclockwise and remove them. 3. Turn the screws and the center section of the plastic retainers counterclockwise and remove them, then remove the mudguard. Removal 5. Turn the socket and bulb assembly counterclockwise and remove it. Carefully remove the bulb from its socket in the reflector by gently pulling it straight backward out of the socket. Installation 4. Disconnect the electrical connector from the bulb by pressing the tab on the connector with your finger and pulling the connector downward. 6. Install the new bulb in the reverse order of removal. NOTE l l l To replace the bulb, contact an Authorized Mazda Dealer If the halogen bulb is accidentally touched, it should be cleaned with rubbing alcohol before being used. Use the protective cover and carton of the replacement bulb to dispose of the old bulb promptly out of the reach of children. Side turn signal lights í, Brake lights, Taillights, High-mount brake light Due to the complexity and difficulty of the procedure, the LED bulbs should be replaced by an Authorized Mazda Dealer. NOTE LED bulb replacement is not possible. The rear combination component must be replaced. 8-42 í Some models. Form No.8AU2-EA-09G