2010 Mazda CX-9 Owner's Manual - Page 20

CX-9_8AU2-EA-09G_Edition1 Page20 Wednesday, July 8 2009 12:3 AM Black plate (20,1) Essential Safety Equipment Seats NOTE l l l l If the seat is already adjusted to the position you are activating, the seat does not move (a beep sound is not heard). The advanced key/retractable key cannot be programmed while the key is inserted in the key cylinder. If any of the following operations is performed while activating a seat, the activation will cancel (After pressing a programming button or unlocking the doors with a programmed advanced key/ retractable type key, and while the positions are being adjusted). The selector lever is shifted to a position other than P (With the ignition switch in the ON position). Any of the seat adjustment switches other than a lumbar support switch are operated. The set button is pressed. A programming button (1―3) is pressed. Vehicle locking/unlocking is done using the transmitter. The vehicle starts moving. (To cancel the seat activation when using a programmed advanced key/retractable type key to unlock the doors) Perform the following procedure. Turn the ignition switch to the LOCK position. Press the set button next to the programming buttons and then the lock button on the advanced key/retractable type key within about 5 seconds. A beep sound is heard after the operation is completed. l l l l l l l l qLumbar Support Adjustment (Driver's Seat) Manually operated To increase the seat firmness, pull the lever forward. Push the lever backward to decrease firmness. Electrically operated The amount of lumbar support can be adjusted by pressing the switch. To increase the seat firmness, press and hold the front part of the switch to the desired position, then release it. Press the rear part of the switch to decrease firmness. 2-8 Form No.8AU2-EA-09G