2001 Mercury Villager Owner Guide 2nd Printing
2001 Mercury Villager Manual
2001 Mercury Villager manual content summary:
- 2001 Mercury Villager | Owner Guide 2nd Printing - Page 1
restraints Starting and driving Starting Driving Roadside emergencies Servicing Maintenance and care Capacities and specifications Customer assistance retrieval system or translation in whole or part is not permitted without written authorization from Ford Motor Company. Ford may change the contents - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 2
be required by California law: CALIFORNIA Proposition 65 Warning WARNING: Engine exhaust, some of its constituents, and certain vehicle to Seating and safety restraints for more information. Indicates that this Owner Guide contains information on this subject. Please refer to the Index to locate - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 3
, Corrosion Coverage, and 7.3L Power Stroke Diesel Engine Coverage. In addition, your vehicle is eligible for Emissions Defect and Emissions Performance Warranties. For a detailed description of what is covered and what is not covered, refer to the Warranty Guide that is provided to you along with - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 4
of the symbols you may see on your vehicle. Vehicle Symbol Glossary Safety Alert See Owner's Guide Fasten Safety Belt Air Bag-Front Air Bag-Side Child Seat Installation Warning Brake System Brake Fluid Non-Petroleum Based Master Lighting Switch Child Seat Child Seat Tether Anchorage Anti-Lock - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 5
Symbol Engine Oil Engine Coolant Temperature Battery Do Not Open When Hot Avoid Smoking, Flames, or Sparks Explosive Gas Battery Acid Fan Warning Maintain Correct Fluid Level Engine Air Filter Jack MAX MIN Power Steering Fluid Emission System Passenger Compartment Air Filter Check fuel cap 5 - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 6
140 60 40 80 90 SERVICE ENGINE SOON 1 0 20 MPH 160 km/h TRIP A 100 F E OFF DIM PUSH INTERIOR RES ACCEL VOL NEXT VOL CANCEL COAST SET Turn signal lever (pg. 87) Windshield wiper/washer control (pg. 88) Foglamp control (pg. 23) Speed control (pg. 82) Driver air bag (pg. 131) Audio - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 7
RR DEF OG SECUR ITY Audio system (pg. 42) VOL - PUSH ON DC 12V AM FM BASS TREB BAL FADE CLK TAPE AMS CD SEEK TUNE SCAN EJ SIDE 1 - 2 REW FF DISCS CD CD COMP SHUFFLE 1 1 2 3 4 5 6 Climate control system (pg. 24) 2 3 4 MAX A/C OFF OFF REAR 1 2 3 4 A/C CD Changer* (pg. 76) 7 - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 8
WARNING LIGHTS AND ABS SERVICE ENGINE SOON AIR BAG ! P BRAKE P R N D 2 1 O/D OFF Charging system Illuminates when the ignition is turned to the ON position and the engine is off. The light also illuminates when the battery is not charging properly, requiring electrical system service. Air - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 9
illuminates if the parking brake is engaged. If the brake warning lamp does not illuminate at these times, seek service immediately. Illumination after releasing the parking brake indicates low brake fluid level and the brake system should be inspected immediately. Engine oil pressure Momentarily - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 10
turn signal or the hazard lights are turned on. If one or both of the indicators stay on continuously or flash faster, check for a burned-out turn . The "SET" light turns off when the cruise cancel control is pressed or the brake is applied. Both the "CRUISE" and "SET" lights turn off when the - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 11
or fails to illuminate, have the system serviced immediately. With the ABS light on, the anti-lock brake system is disabled and normal braking is still effective unless the brake warning light also remains illuminated with the parking brake released. Service engine soon Your vehicle is equipped with - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 12
heavy acceleration and deceleration) and have your vehicle serviced at the first available opportunity. Under engine misfire conditions, excessive exhaust temperatures could damage the catalytic converter, the fuel system, interior floor coverings or other vehicle components, possibly causing a fire - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 13
is depressed or if the light flashes steadily, have your vehicle serviced as soon as possible, damage to the transmission could occur. Low washer fluid Illuminates when the ignition is turned to the ON position and when the windshield washer fluid is low. Safety belt warning chime Sounds to remind - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 14
INST ECONOMY AVG. ECONOMY TO EMPTY MPH km/h km FUEL DOOR 1/2 N O R M A L E C UNLEADED FUEL ONLY ABS SERVICE ENGINE SOON AIR BAG ! P BRAKE P R N D 2 1 O/D OFF Tachometer Indicates the engine speed in revolutions per minute. Driving with your tachometer pointer continuously at the top of - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 15
Instrumentation • Optional electronic instrument cluster CRUISE 3 4 5 6 7 8 2 1 0 X 1000 TRIP 1 TRIP 2 RPM MPH km/h km Speedometer Indicates the current vehicle speed. • Standard analog instrument cluster 40 30 20 10 0 50 60 70 80 100 120 140 60 40 80 90 20 MPH 160 km/h TRIP A 100 • - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 16
cluster To reset, press and hold the control for one second. • Optional electronic instrument cluster 4 CRUISE 3 Refer to Electronic Message Center 2 for information on how to switch the 1 display from Trip 1 and Trip 2 0 features on the electronic instrument cluster. TRIP A 5 6 7 8 X 1000 - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 17
and care chapter. This gauge indicates the temperature of the engine coolant, not the coolant level. If the coolant is not at its proper level or mixture, the gauge indication will not be accurate. Never remove the radiator cap while the engine is running or hot. • Standard analog instrument cluster - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 18
see how many kilometers/miles you can drive before running out of fuel. You can select different features for the message center to display by using the message center controls located to the left of the instrument panel. Selectable features SELECT Press this control to select the following features - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 19
RST English to metric. To switch the Electronic Automatic Temperature SELECT OD / TRIP Control (if equipped) the trip 1 and 2 odometer mileage. Message center functions OUTSIDE TEMP Press SELECT until the menu displays OUTSIDE This will display the temperature of the air outside of your vehicle. The accurate - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 20
˚F ˚C MILES/GAL liters/100 km or miles/gallon based L/100 km MILES km on the type of traffic you automatic shut-off points on the fuel pumps at service stations • rounding of the displayed values to the nearest 0.1 liter (gallon) Checking your highway fuel economy using the electronic message center - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 21
current SELECT OD / TRIP average measure will change as the speed control system changes the engine speed to maintain a constant vehicle speed. This is most noticeable in hilly environments. 4. the fuel tank. When the engine is restarted, the message center will display the last setting selected. 21 - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 22
position to also turn on the headlamps. Push the control to turn on the interior lamps. Push control again to turn off the interior lamps. AUTO 1 AUTO 2 OFF PUSH INTERIOR High beams Push forward to activate. Pull toward you to deactivate. HI LO F S OFF Flash to pass Pull toward you to activate - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 23
. Press the foglamp control a second time to deactivate the foglamps. AUTOLAMP CONTROL (IF EQUIPPED) The autolamp system provides light OFF AUTO sensitive automatic on-off control of 1 the low-beam exterior lights AUTO normally controlled by the headlamp 2 control. The autolamp system also keeps the - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 24
to the inside of the vehicle. MAX A/C OFF A/C Control A/C This control is used to manually enable or disable the operation of the air conditioning in all modes. In all modes, the air conditioning will only function if the outside temperature is about 4°C (40°F) or higher. When A/C is selected - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 25
is depressed. However, the air conditioning will only function if the outside temperature is about 4°C (40°F) or higher. Since the air conditioner removes considerable moisture from the air during operation, it is normal if clear water drips on the ground under the air conditioner drain while the - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 26
(40°F) or higher, the air conditioner will automatically dehumidify the air to reduce fogging. However, the A/C indicator will not be lit unless the A/C control is selected. • Cooling your vehicle with outside air Cooling your vehicle with air conditioned outside air is quieter but less economical - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 27
under the front seats. Airflow and temperature to the rear seating are regulated by the main climate control system. The rear passenger compartment air conditioning system (if equipped) should be set to OFF, if rear heating is desired. OFF REAR A/C 1 2 3 4 A/C Operating tips • In humid weather - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 28
closed during warm weather conditions, the air conditioner will perform more back seats (if equipped). • Remove any snow, ice or leaves from the air intake area at the base of the windshield. • If your vehicle has been parked with the windows closed during hot weather, the air conditioner - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 29
as these objects may become projectiles in a collision or sudden stop. Rear passenger compartment air conditioning system (if equipped) This system allows the rear seat occupants to adjust their air conditioning comfort level. The rear A/C fan speed control allows the rear passengers to control the - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 30
climate control system on the instrument panel. Ensure that the control is set to REAR A/C to engage the rear passenger compartment air conditioning system. 1 2 3 4 MAX A/C OFF OFF REAR A/C 1 2 3 4 A/C Turning the Rear A/C on 1. Set the main climate control rear fan control to Rear A/C; set the - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 31
is designed for air conditioning purposes only, and does not heat the rear compartment. Rear compartment heating is provided by the underseat floor ducts. Refer to Rear Seat Heating. Electronic Automatic Temperature Control (EATC) system (if equipped) OFF A/C MAX HI TEMP AUTOMATIC OFF REAR - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 32
, airflow location and if outside air or recirculated air is required. Fan speed remains automatic unless the fan speed control is turned. When in AUTOMATIC and weather conditions require heat, air will be sent to the front and rear floor ducts. However, if the engine is not warm enough to provide - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 33
and fan speed controls as necessary. Temperature selection The display window indicates the selected temperature, function (AUTO or one of the override controls) and manual control of fan ) if automatic fan speed is not desired. speed ( To control the temperature, select any temperature between 15 - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 34
between Fahrenheit and Celsius. Fan speed ( ) When AUTOMATIC is pressed, fan speed is adjusted automatically for existing conditions. You can override fan speed at any time. To control fan speed manually, use the thumbwheel to cancel automatic fan speed operation. Rotate the thumbwheel up for - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 35
only when required when AUTOMATIC has been selected. However, the air conditioning will only function if the outside temperature is about 4°C (40°F) or higher. Since the air conditioner removes considerable moisture from the air during operation, it is normal if clear water drips on the ground - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 36
vehicle faster. After pressing the MAX control, both the MAX and A/C A/C indicators will light and the airflow will be from the instrument panel registers. In this mode, the air conditioning will automatically engage if the outside temperature is about 4°C (40°F) or higher. • Cooling your vehicle - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 37
under the front seats. Airflow and temperature to the rear seating are regulated by the main climate control system. The rear passenger compartment air conditioning system (if equipped) should be set to OFF, if rear heating is desired. OFF REAR 1 A/C 2 3 4 Operating tips • In humid weather, select - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 38
been parked with the windows closed during warm weather conditions, the air conditioner will perform more efficiently in cooling the vehicle the air intake area at the base of the windshield. • If your vehicle has been parked with the windows closed during hot weather, the air conditioner will - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 39
place objects on top of the instrument panel, as these objects may become projectiles in a collision or sudden stop. Rear passenger air conditioning system - EATC systems On vehicles equipped with front passenger EATC systems, the vehicle will also have rear passenger compartment climate controls - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 40
system on the instrument panel. Ensure that the control is set to REAR A/C to engage the rear passenger compartment air conditioning system. OFF A/C MAX HI TEMP AUTOMATIC OFF REAR 1 A/C 2 3 4 LO Turning the Rear A/C on 1. Set the main climate control rear fan control to Rear A/C; set the - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 41
for the front seat passengers, set the rear fan switch to the OFF (0) position. Please note that the rear passenger air conditioning system is designed for air conditioning purposes only, and does not heat the rear compartment. Rear compartment heating is provided by the underseat floor ducts. Refer - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 42
defroster. The defroster turns off automatically after 15 minutes or when the ignition is turned to the OFF position. To manually turn off the defroster before 15 minutes have passed, push the control again. USING YOUR AUDIO SYSTEM AM/FM Stereo/Cassette (CD changer compatible) VOL - PUSH ON AM - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 43
on at a "nominal" listening level when the ignition switch is turned back on. AM/FM select The AM/FM select control works in radio, tape and CD changer modes (if equipped). AM FM CD AM/FM select in radio mode This control allows you to select AM or FM frequency bands. Press the control to switch - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 44
. Hold the control • Press to fast-forward through the remaining discs. Seek function The seek function control works in radio or CD changer mode. Seek function in radio mode • Press to find the next listenable station down the frequency band. • Press to find the next listenable station up the - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 45
. After the last track has been completed, the first track of the current disc will automatically replay. Scan function The scan function works in radio or CD changer mode (if equipped). SCAN Scan function in radio mode Press the SCAN control to hear a brief sampling of all listenable stations on - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 46
Controls and features Bass adjust The bass adjust control allows you to increase or decrease the audio system's bass output. BASS Treble adjust The treble adjust control allows you to increase or decrease the audio system's treble output. TREB Speaker balance adjust Speaker sound distribution - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 47
Controls and features Tape select • To enter tape mode while in radio or CD changer mode, press the TAPE control. • If no tape is found, NO TAPE appears in the display. CLK TAPE AMS Automatic Music Search The Automatic Music Search feature allows you to quickly locate the CLK beginning of the tape - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 48
the control again to deactivate rewind mode. Fast forward The fast forward control works in tape and CD changer modes. To fast forward in tape mode, press SIDE 1 - 2 the 1-2/FF control. Tape direction will automatically REW FF reverse when the end of the tape is reached. Press the SIDE/REW control - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 49
again. Tape direction select Press SIDE and 1-2 at the same time to play the alternate side of a tape. Eject function Press the control to stop and eject a tape. CLK to toggle between listening frequencies and clock mode while in radio mode. To set the hour, press and hold the CLK control and press - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 50
display for 10 seconds before reverting back to the clock. In media mode, the media information will always be displayed. Rear seat controls (if equipped) The Rear Seat Controls (RSC) allow the rear seat passengers to operate the radio, tape, or CD changer (if equipped). VOLUME MEDIA MEM SEEK - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 51
Controls and features CD CD COMP SHUFFLE 1 2 3 4 5 6 To turn on the rear seat controls, press the memory preset controls 3 and 5 at the same time. The will appear in the radio display. Pressing 3 and 5 at the same time again will turn the rear seat controls off. Adjusting the volume Press - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 52
MEM control successively to allow rear sear passengers to scroll through the six memory presets in AM, FM1, or FM2. Push the MEM control in CD changer mode (if equipped) to advance to the next disc. VOLUME MEDIA MEM SEEK Seek function • Press to find the next listenable station down the VOLUME - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 53
/FM Cassette (CD changer compatible) BASS SEL VOL PUSH ON CD TAPE EJ TREB FADE BAL RDS / CLK MUTE SEEK TUNE SCAN AUTO AM FM REW FF SIDE 1.2 COMP SHUFF 1 2 3 4 5 6 Your audio system is equipped with selective lighting, a unique lighting strategy. This lighting feature is operable - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 54
on at a "nominal" listening level when the ignition switch is turned back on. AM/FM select The AM/FM select control works in radio, tape and CD changer modes (if equipped). AM FM AM/FM select in radio mode This control allows you to select AM or FM frequency bands. Press the control to switch - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 55
the last track has been completed, the first track of the current disc will automatically replay. Scan function The scan function works in radio, tape or CD changer mode (if equipped). SCAN Scan function in radio mode Press the SCAN control to hear a brief sampling of all listenable stations on - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 56
CD changer mode (if equipped) Press the SCAN control to hear a short sampling of all selections on the CD (The CD scans in a forward direction, wrapping back to the first track at the end of the CD.). To stop on a particular selection, press the control again. Radio station memory preset The radio - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 57
sound can be adjusted between the front and rear speakers. BAL SEL FADE Tape/CD changer mode select (if equipped) • To begin tape play (with a tape loaded into the audio system) CD TAPE while in the radio or CD changer mode, press the TAPE control. Press the button during rewind or fast forward to - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 58
the CD player as jamming may occur. Rewind The rewind control works in tape REW and CD changer modes (if equipped). 1 • In tape mode, radio play will CD changer modes (if equipped). 2 • In the tape mode, tape direction will automatically reverse when the end of the tape is reached. • In CD changer - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 59
5 Shuffle feature (if equipped) The shuffle feature operates in CD SHUFF changer mode and plays all tracks on the current disc in random order again. Radio Data System (RDS) feature When selected, the RDS (Radio Data System) function performs the RDS / CLK following: • Displays the radio station - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 60
. RDS / CLK • Use the SEL control to select ON or OFF. With the feature on, use the SEEK or SCAN control to SEL find a radio station broadcasting a traffic report (if it is broadcasting RDS data). Traffic information is not available in most U.S. markets. Program type • Press the RDS control - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 61
text displayed). RDS / CLK SEL Setting the clock Press the CLOCK control until SELECT HOUR or SELECT MINS is displayed. Use the SEL control to manually set the time. to increase • Press hours/minutes. • Press to decrease hours/minutes. RDS / CLK SEL Mute mode Press the control to mute the - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 62
headphones). Using headphones/Personal Audio System The Personal Audio System allows the rear seat passengers to listen to one media source (radio, tape, CD, or CD changer if equipped) while the front seat passengers listen to another. However, front and rear seat passengers can not listen to two - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 63
MEM control successively to allow rear sear passengers to scroll through the six memory presets in AM, FM1, or FM2. Push the MEM control in CD changer mode (if equipped) to advance to the next disc. VOLUME MEDIA MEM SEEK Seek function • Press to find the next listenable station down the VOLUME - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 64
(CD Changer Compatible) VOL - PUSH ON or DISC EJ FM1 ST MUTE AM SEEK TUNE REW FM DOLBY B NR EJ TAPE CD AUTO RDS CLK SCAN FF BASS TREB SIDE 1-2 SEL BAL COMP FADE SHUFFLE 1 2 3 4 5 6 Your audio system is equipped with selective lighting, a unique lighting strategy. This lighting - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 65
level when the ignition switch is turned back on. If you wish to maintain your preset volume level, turn the audio system off with the power control before switching off the ignition. AM/FM select The AM/FM select control works in radio, tape and CD modes. AM FM AM/FM select in - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 66
CD changer. (Play will begin on the first track of the TUNE TUNE disc unless the CD changer CD changer. Hold the control • Press to fast-forward through the remaining discs. Seek function The seek function control works in radio, tape or CD mode. Seek function in radio for CD changer (if CD changer - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 67
CD. (The CD scans in a forward direction, wrapping back to the first track at the end of the CD.) To stop on a particular selection, press the control again. Radio station memory preset The radio allows you to set strong radio stations without losing your original manually set preset stations. This - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 68
memory preset controls will all store the last strong station available. To deactivate autoset and return to your audio system's manually set memory stations, press the AUTO control again. Bass adjust The bass adjust control allows you to increase or decrease the audio system's bass output. Press - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 69
sound to the front and to shift sound to the rear. • BAL FADE SEL Tape/CD/CD changer (if equipped) select • To begin tape play (with a tape loaded into the audio system) TAPE CD while in the radio or CD mode, press the TAPE control. Press the button during rewind or fast forward to stop the - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 70
will automatically reverse when the end of the tape is reached. • In CD mode, pressing the control for less than three seconds results in slow forward action. Pressing the control for more than three seconds results in fast forward action. Tape direction select Press SIDE 1-2 to play the alternate - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 71
mode and plays all tracks on the 6 current disc in random order. If equipped with the CD changer, the shuffle feature continues to the next disc after all tracks on the current disc are until SELECT HOUR is displayed and press: • • to decrease hours and to increase hours. AUTO RDS CLK SEL 71 - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 72
AUTO RDS CLK SEL Radio Data System (RDS) feature When selected, the RDS (Radio AUTO Data System) function performs the RDS following: CLK • Displays the radio announcement When set ON, this traffic feature will interrupt tape or CD play to play a traffic report broadcast from a FM RDS station. - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 73
alert, press SCAN or SEEK while TRAFFIC ON is displayed. The radio will then SCAN or SEEK only to traffic capable stations. RDS select program type • Press the RDS control until FIND program type is displayed. AUTO RDS CLK • Use the SEL control to select the desired program type. - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 74
media. EJ MUTE Rear seat controls (if equipped) The Rear Seat Controls (RSC) allow the rear seat passengers to operate the radio, tape, CD, or CD changer (if equipped). VOLUME MEDIA MEM SEEK REW FF SIDE 1-2 COMP SHUFFLE 1 2 3 4 5 6 To turn on the rear seat controls, press the - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 75
/Personal Audio System The Personal Audio System allows VOLUME MEDIA MEM SEEK the rear seat passengers to listen to one media source (radio, tape, CD, or CD changer if equipped) while the front seat passengers listen to another. However, front and rear seat passengers can not listen to two different - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 76
mode, use the SEEK function to access the next or previous selection. In CD or CD changer mode (if equipped), use the SEEK function to access the next or the previous selection. CD changer (if equipped) The CD changer is located in the center console of your vehicle. 1. Slide the door to access the - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 77
you pull too hard on the disc holder, the disc holder may come completely out of the magazine. If this happens, reinsert the disc holder back into the magazine while pressing on the lever (A). 77 - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 78
CD magazine may be inserted or ejected with the radio power on or off. ONLY use the magazine type supplied with the CD changer, other types will damage the unit. Keep the CD changer with removable labels into the CD player as jamming may occur. Troubleshooting the CD changer (if equipped) The laser - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 79
necessary, clean discs only with an approved CD cleaner and wipe from the center out to the edge. Do not use circular motion. CD and CD changer care • Handle discs by their edges only by inserting a finger or pencil into the hole and turning the hub. • Remove loose labels before inserting tapes. 79 - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 80
. Hills, mountains and tall buildings between your vehicle's antenna and the radio station signal can cause FM reception problems. Static can be caused on AM stations by power lines, electric fences, traffic lights and thunderstorms. Moving away from an interfering structure (out of its "shadow - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 81
Controls and features AUXILIARY POWER POINT Power outlets are designed for accessory plugs only. Do not hang any type of accessory or accessory bracket from the plug. Improper use of the power outlet can cause damage not covered by your warranty. The power point is an additional power source for - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 82
LOCK, shuts off the engine 3 and all accessories/locks the steering wheel, gearshift lever and allows key 2 removal. 4 2. ACC, allows the electrical accessories such as the radio to operate while the engine is not running. 1 3. ON, all electrical circuits operational. Warning lights illuminated. Key - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 83
vehicle speed is faster than the set speed while driving on a downhill, you may want to shift to the next lower gear or apply the brakes to reduce your vehicle speed. If your vehicle slows down more than 12.2 km/h (8 mph) below your set speed on an uphill, your speed control - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 84
or • Press and release COAST/SET to operate the Tap-Down function. Each press will decrease the set speed by 1.6 km/h (1 mph) or • Depress the brake pedal. When the desired vehicle speed is reached, press COAST/SET. RES ACCEL CANCEL COAST SET 84 - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 85
Controls and features To disengage speed control • Depress the brake pedal. • Press CANCEL. Disengaging the speed control will not erase the previously programmed set speed. RES ACCEL ON CANCEL OFF COAST SET • Press OFF. Pressing - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 86
The "SET" light turns off when the cruise cancel control is pressed or the brake is applied. Both the "CRUISE" and "SET" lights turn off when the cruise cancel control is pressed, the brake is applied or the ignition is turned to the OFF position. STEERING WHEEL CONTROLS (IF EQUIPPED) These controls - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 87
: • Press NEXT to select the next preset station within the current radio band. In Tape mode: • Press NEXT to listen to the next selection on the tape. In CD mode: • Press NEXT to listen to the next track on the disc. In any mode: • Press VOL up or down to adjust the - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 88
for slow intervals. Push the control on the end of the stalk to activate washer. Push and hold for a longer wash cycle. The washer will automatically shut off after ten seconds of continuous use. Rear window wiper and washer Press the wiper control to activate the rear wiper. Press again to - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 89
operate in all gears except overdrive. To return to normal overdrive mode, press the Transmission Control Switch again. The O/D OFF indicator light will no longer be illuminated. When you shut off and re-start your vehicle, the transaxle will automatically return to normal D (Overdrive) mode. 89 - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 90
additional information about the gearshift lever and the transmission control switch operation refer to the Automatic Transaxle Operation section of the Driving chapter. TILT STEERING WHEEL Push the tilt steering wheel lever downward to move the steering wheel up or down. Push the control upward to - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 91
window operation. AUTO Window lock The window lock feature allows only the driver to operate the power windows. To lock out all the window controls except for the driver's press the control. Press the control again to restore the window controls. Accessory delay With accessory delay, the window - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 92
key, turn the key once toward the rear of the vehicle to unlock that door only. Turn the key back to the original position and then to the rear a second time to unlock all doors. When locking, turn for each door. Setting the lock for one door will not automatically set the lock for both doors. 92 - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 93
Controls and features Pull lock control out to engage the lock. Push control in to disengage childproof locks. POWER SIDE VIEW MIRRORS The ignition must be in ACC or ON position to adjust the power side view mirrors. To adjust your mirrors: 1. Select L to adjust the left mirror or R to adjust the - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 94
L R 3. Return to the center position to lock mirrors in place. Heated outside mirrors (if equipped) Both mirrors are heated automatically to remove ice, mist and fog to replace up to three hand-held transmitters with a single built-in device. This feature will learn the radio frequency codes of - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 95
replace step 3 with the procedure in the "Canadian Programing" section. 4. The red light will flash slowly and then rapidly. Release both buttons when the red light at HomeLink.jci.com. Canadian Programming During programming, your hand-held transmitter may automatically stop transmitting after two - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 96
light flashes rapidly and then turns solid after two seconds. After completing the "Programming" functions, follow these steps to train a garage door opener with the rolling code feature: 1. Locate the training button on the garage door motor head unit. Refer to the garage door opener manual - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 97
trained, follow these steps: 1. Press and hold the desired HomeLink button. Do NOT release until step 4 has been completed. 2. When the indicator light begins to flash slowly (after 20 seconds), position the hand-held transmitter 5-14 cm (2 to 5 inches) away from the HomeLink surface. 3. Press - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 98
To turn on the visor mirror lamps, lift the mirror cover. OVERHEAD CONSOLE (IF EQUIPPED) The appearance of your vehicle's The conversation mirror allows the driver to view the rear seating area. This does not replace the rear view mirror. Push up to access the conversation mirror. Pull down on - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 99
Controls and features The dome lamp will stay on if the control is moved to the ON position. When the control is in the middle position, the lamp will only come on when a door is opened. If the control is moved to the OFF OFF - ON position, the lamp will not come on at all. The dome lamp will - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 100
motor may overheat and shut down for 45 seconds while the motor cools. Do not let children play with the moon roof. They may seriously hurt themselves. CENTER system. Refer to the Autovision Entertainment System User Manual for operating instructions or call 1-877-848-6434 for product assistance. - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 101
part 15 of the FCC rules and with RS-210 of Industry Canada. Operation is subject to the following two conditions: alarm. If there is any potential remote keyless entry problem with your vehicle, ensure ALL key fobs (remote entry transmitters) are brought to the dealership, to aid in troubleshooting - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 102
illuminate when the remote entry system is used to unlock the door(s) or sound the panic alarm. The system automatically turns off after 15 seconds or when the ignition is turned to the RUN position. The inside lights will not turn off if: • they have been turned on with the headlamp control or - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 103
) away from your vehicle. A decrease in operating range can be caused by: • weather conditions • nearby radio towers • structures around the vehicle • other vehicles parked next to the vehicle To replace the battery: 1. Twist a thin coin between the two halves of the transmitter near the key ring - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 104
problem with your vehicle, ensure ALL key fobs (remote entry transmitters) are brought to the dealership, to aid in troubleshooting of the following actions will prearm the alarm system: • Lock the doors with the simultaneously for two seconds. The hazard lights will flash three times each time the - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 105
using your remote entry transmitter. • Unlock the doors with a key. Turn the key full travel (toward the rear of the vehicle) to make sure the alarm disarms. • Turn ignition to ACC or ON. Triggering the anti-theft system The armed system will be triggered if: • Any door or liftgate is opened - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 106
liftgate, insert key into lock and turn counterclockwise. Pull back and upward on liftgate handle to fully open liftgate. • The auto-rise feature automatically raises the liftgate or window (if equipped). In cold weather or window open, keep the vents open so outside air comes into the vehicle. 106 - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 107
exceed 22 kg (50 lbs.) or the net may not stay secured. The cargo net is not designed to restrain objects during a collision or heavy braking. Front Cargo net (if equipped) The front cargo net can be used to hold small items between the front seats. To install the net, secure - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 108
Controls and features Parcel Shelf (if equipped) Your vehicle may be equipped with a 14 kg (30 lbs.) maximum capacity parcel shelf located behind the rear seat of your vehicle which can be positioned to three different heights. To remove the shelf: 1. Open the liftgate. 2. Disconnect the net loop - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 109
Controls and features Make sure the rear seat back is in the rearmost/upright position when parcel shelf is loaded. Do not load any objects on the parcel shelf that may obstruct your vision - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 110
restraints. The head restraints can be moved up and down. Push side control and push down on head restraint to lower it. Adjusting the front manual seat Never adjust the driver's seat or seatback when the vehicle is moving. Do not pile cargo higher than the seatbacks to reduce the risk - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 111
Seating and safety restraints Always drive and ride with your seatback upright and the lap belt snug and low across the hips. Reclining the seatback can reduce the effectiveness of the seat's safety belt in the event of a collision. Lift handle to move seat forward or backward. Pull lever up to - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 112
Seating and safety restraints Always drive and ride with your seatback upright and the lap belt snug and low across the hips. Reclining the seatback can reduce the effectiveness of the seat's safety belt in the event of a collision. Move the control up or down to move the seat up and down. • 6 way - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 113
the manual lumbar support The lumbar control is located on the inboard side of the driver's seat. Move the control up or down to adjust lumbar support. the desired position using the manual controls. 2. Press button 1 or 2 and hold for at least two seconds. The indicator light will stay on until the - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 114
on the transmitter while the memory button is pressed. 3. When the transmitter has been programmed, the indicator will flash five times. The indicator light will remain illuminated until the memory button is pressed again or ten seconds lapse. To remove a programmed seat position: 1. Press and hold - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 115
Seating and safety restraints • 4 passenger vehicle (with third row seat in storage position) A. Cargo mat B. Narrow mats C. Sliding door mats, LH/RH A B C B • 5 passenger vehicle (second row seats removed) A. Cargo mat B. Narrow mats C. Sliding door mats, LH/RH B A B C 115 - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 116
Seating and safety restraints • 5 passenger vehicle (second row seats removed and third row bench seat moved forward to limousine seating position) A. Cargo mat B. Narrow mats A B • Two passenger vehicle (second row seats removed and third row seat stored in full forward position - if equipped - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 117
The vehicle is equipped with cupholders that pull out from the 2nd row seat: • Bench seat - below center of the seat cushion • Bucket seat (driver's side only) inboard side of seat base Use only soft cups in the cupholder. Hard objects can injure you in a collision. Adjusting 2nd row bench - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 118
Seating and safety restraints 2nd row bucket seats (if equipped) • Adjusting the left side bucket seat Pull control up to recline the seatback or fold the seatback flat. • Adjusting the right side (E-Z Entry Tip Slide) bucket seat The E-Z Entry Tip Slide seat allows for easier entry and exit to and - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 119
Seating and safety restraints To exit the third row seat, pull up on the 3rd row access control. To return the seat to a seating position, move the seat rearward until the seat track locks. Then readjust the seatback. Lift handle to move the seat forward or backward. 119 - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 120
Seating and safety restraints Pull control up to flip seatback to a forward flat position. Adjusting 3rd row bench Pull control up to adjust seatback position. This control will also allow the seatback to be put in the forward flat position. 120 - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 121
be in the way, see Removable floor mats in this chapter for instructions on placement of floor mats. For vehicles equipped with a second row bench (opposite the driver) should fasten the standard lap/shoulder belt. The secondary seat belt tongue is not fastened to the outside bottom of the seat - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 122
Seating and safety restraints To move the seat to another seating or storage position: 1. Lift control (A) to release the seat cushion and flip the cushion up. The seat cushion must be moved to the storage position before the seat can be moved along the track. A 2. Pull control (B) to move the seat - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 123
adjust any seat, check to be sure Use the following instructions for both bench and belt detach anchor by pushing the release control and lifting upward. 2. From behind the seat, pull up on the release straps located on each side of the seat, releasing the rear floor latches. 3. Lift up the back - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 124
that the seat is locked in place both front and back. 3. (Bench seats only) Make sure the safety belt is not twisted, then insert the seat belt tongue into detachable anchor until you hear a "click the driver, should always properly wear their safety belts, even when an air bag SRS is provided. 124 - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 125
for more than one person. Always transport children 12 years old and under in the back seat and always properly use appropriate child restraints. Combination lap and shoulder belts 1. Insert the belt tongue into the proper buckle (the buckle closest to the direction the tongue is coming from) until - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 126
movement. For example, if the driver brakes suddenly or turns a corner sharply, or the vehicle receives an impact of approximately 8 km/h (5 mph) or more, the combination safety belts will lock to help reduce forward movement of the driver and passengers. Automatic locking mode In this mode, the - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 127
mode. How to disengage the automatic locking mode Ford recommends that all safety belt assemblies and attaching hardware should be inspected by a qualified technician after any collision. Safety belt assemblies not in use during a collision should also be inspected and replaced if either damage or - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 128
belts should be checked for proper function. BELT AND RETRACTOR ASSEMBLY MUST BE REPLACED if the seat belt assembly "automatic locking retractor" feature or any other seat belt function is not operating properly when checked according to the procedures in Workshop Manual. Failure to replace the Belt - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 129
of your shoulder. Failure to adjust the safety belt properly could reduce the effectiveness of the seat belt and increase the risk of injury in a collision. Lap belts Adjusting the center lap belt The lap belt does not adjust automatically. The lap belt should fit snugly and as low as possible - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 130
to change the fit of the shoulder belt across the torso. Safety belt warning light and indicator chime The seat belt warning light illuminates in the instrument cluster and a chime sounds to remind the occupants to fasten their safety belts. Conditions of operation If...The driver's safety - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 131
if necessary replace the safety belt assembly under the above conditions could result in severe personal injuries in the event of a collision. Refer to Cleaning and maintaining the safety belts in the Maintenance and care section. AIR BAG SUPPLEMENTAL RESTRAINT SYSTEM (SRS) 3 2 AUTO 1 AUTO 2 4 40 - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 132
is greatest close to the trim covering the air bag module. All occupants of the vehicle, including the driver, should always properly wear their safety belts, even when an air bag SRS is provided. Always transport children 12 years old and under in the back seat and always properly use appropriate - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 133
to service, repair, or modify the Air Bag Supplemental Restraint System or its fuses. See your Ford or Lincoln Mercury dealer. Modifications to the front end of the vehicle, including frame, bumper, front end body structure and tow hooks may effect the performance of the air bag sensors increasing - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 134
, move the seat all the way back. How does the air bag supplemental restraint system work? The air bag SRS is designed to activate when the vehicle sustains longitudinal deceleration sufficient to cause the sensors to close an electrical circuit that initiates air bag inflation. The fact that the - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 135
air bag electrical system warning (including the impact sensors), the system wiring, the air bag system readiness light, the air bag back up power and the air bag ignitors. Determining if the system is operational The SRS uses a readiness light in the instrument cluster to indicate the condition - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 136
serviced, the system may not function properly in the event of a collision. Disposal of air bags and air bag equipped vehicles (including pretensioners) For disposal of air bags or air especially for children. Check your local and follow the instructions and warnings that come with safety belts If - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 137
belt. Moving the child closer to the center of the vehicle may help provide a good shoulder belt belt-positioning booster seat that is labelled as conforming to all applicable Federal motor vehicle safety standards. Belt follow all of the manufacturer's instructions with the safety seat you put - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 138
Air Bag Supplemental Restraint System section in this chapter. • Use the correct safety belt buckle for that seating position. • Insert the belt back in upright position. • Put the safety belt in the automatic locking mode. Refer to Automatic of the manufacturer's instructions included with the safety - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 139
a rear-facing child seat in front of an active air bag. If you must use a forward-facing child seat in the front seat, move the seat all the way back. 1. Position the child safety seat in a seat with a combination lap and shoulder belt. Children 12 and under should be properly restrained in the - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 140
child seat manufacturer's instructions. Be sure the belt webbing is not twisted. 4. Insert the belt tongue into the proper automatic locking mode, grasp the shoulder portion of the belt and pull downward until all of the belt is extracted and a click is heard. 6. Allow the belt to retract. The belt - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 141
automatic locking mode (you should not be able to pull more belt out). If the retractor is not locked, unbuckle the belt and repeat steps two through nine. Check the child seat manufacturer's instructions. 4. Insert the belt tongue into the proper buckle for the center seating position until you hear - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 142
child seat while pulling on the loose end of the lap belt webbing to tighten the belt. 6. Before placing the child into the child seat, forcibly strap which goes over the back of the seat and hooks to an anchoring point. Tether straps are available as an accessory for many older safety seats. - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 143
Seating and safety restraints Second row seats 1. Position the child safety seat on the seat cushion. 2. Route the child safety seat tether strap over the back of the seat. 3. Grasp the tether strap and position it to the seat frame. 143 - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 144
Seating and safety restraints 4. Rotate the tether strap. 5. Clip the tether strap to the seat tether slot bracket at the lower rear portion of the seatback. If the tether strap is clipped incorrectly (as shown) the child safety seat may not be retained properly in the event of a collision. 144 - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 145
seats in combination lap and shoulder belt seating positions to secure the child safety seat. 8. Tighten the child safety seat tether strap according to the manufacturer's instructions. Third row seats The third row seat child tether anchors are located on the bottom back side of the seat. Refer - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 146
provided in your vehicle at the following locations: The anchors at the center of the rear seat are further apart than the sets of lower compatible child seat (with attachments on belt webbing) can be used at this seating position only if the child seat instructions state that the child seat can - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 147
seat back. Each lower anchor for child seat installation is located 2-3 inches below the locator symbols. Follow the child seat manufacturer's instructions to Tilt the seat from side to side. Also try to tug the seat forward. Check to see if the anchors hold the seat in place. If the safety seat is - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 148
does not slow down automatically, have the vehicle checked. Do not allow the vehicle to idle for more than 10 minutes at the higher engine RPM. Before starting the vehicle: 1. Make sure all vehicle occupants have buckled their safety belts. For more information on safety belts and their proper usage - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 149
brake is set. PUSH TO RELEASE 4. Make sure the gearshift is in P (Park). P R N D 2 1 5. Turn the key to 3 (ON) without 3 turning the key to 4 (START). If there is difficulty in turning the 2 key, firmly rotate the steering wheel 4 left and right until the key turns freely. This condition - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 150
ONLY ABS SERVICE ENGINE SOON AIR BAG ! P BRAKE P R N D 2 1 O/D OFF Make sure the corresponding lights illuminate or illuminate briefly. If a light fails to illuminate, have the vehicle serviced. • If the driver's safety belt is fastened, the light may not illuminate. STARTING THE ENGINE NOTE - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 151
harmful and could kill you. Have the exhaust and body ventilation systems checked whenever: • the vehicle is raised for service. • the sound of the exhaust system changes. • the vehicle has been damaged in a collision. WARNING: Engine exhaust, some of its constituents, and certain vehicle components - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 152
ABS performs a self-check after you start the engine and begin to drive away. A brief mechanical noise may be heard during this test. This is normal. If a malfunction is found, the ABS warning light will come on. If the vehicle has continuous vibration or shudder in the steering wheel while braking - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 153
is still effective unless the BRAKE brake warning light also remains illuminated with parking brake released. (If your brake warning lamp illuminates, have your vehicle serviced immediately.) Using ABS • In an emergency or when maximum efficiency from the four wheel ABS is required, apply continuous - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 154
vehicle with a low power steering pump fluid level (below the MIN mark on the reservoir). If the power steering system breaks down (or if the engine is turned off), you can steer the vehicle manually, but it takes more effort. If the steering wanders or pulls, the condition could be caused by any of - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 155
Driving uneven vehicle loading high crown in center of road high crosswinds wheels out of alignment loose or worn suspension components AUTOMATIC TRANSAXLE OPERATION Brake-shift interlock This vehicle is equipped with a brake-shift interlock feature that prevents the gearshift lever from being - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 156
brake is fully released, but the brake warning lamp remains illuminated, the brakes may not be working properly. See your dealer or a qualified service technician. Understanding gearshift positions Your automatic power from the battery. When the battery is disconnected or a new battery is installed, - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 157
OVERDRIVE OFF/ON shifts back and forth between third automatically return to normal overdrive mode. If your vehicle is on an extremely slippery surface, the Transaxle Control Module may receive a signal indicating a rapid increase or decrease in wheel speed. When the module detects this condition - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 158
light illuminated, the transaxle will operate in first, second and third gears and will not shift into fourth gear. Operating in D (O/D OFF) provides more engine braking (First) for when added engine braking is desired when descending P R N D 2 1 steep hills. The automatic transaxle will shift to the - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 159
best fuel economy for normal driving conditions. For manual control, start in 1 (First) and then shift manually. To put your vehicle in gear, start the P R N D 2 1 engine, depress the brake pedal, then move gearshift lever out of P (Park). DRIVING THROUGH WATER Do not drive quickly through standing - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 160
light pressure on the brake pedal. Driving through deep water where the transaxle is submerged may allow water into the transaxle and cause internal damage. VEHICLE LOADING Before loading a vehicle, familiarize yourself with the following terms: • Base for each engine/transmission combination, any - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 161
tires with lower load carrying capacities than the originals because they may lower the vehicle's GVWR and GAWR limitations. Replacement tires with a higher limit than the originals do not increase the GVWR and GAWR limitations. The Certification Label, found on the inside pillar of the - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 162
Package is recommended for towing of any trailer since it provides a heavy duty battery, conventional size spare tire and wiring. Trailer towing puts additional loads on your vehicle's engine, transmission, axle, brakes, tires, and suspension. For your safety and to maximize vehicle performance, be - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 163
which attaches to the axle. Follow the towing instructions of a reputable rental agency. Whenever a trailer hitch and hardware are removed, make sure all mounting holes in the underbody are properly sealed to prevent noxious gases or water from entering. Safety chains Always connect the trailer - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 164
Driving If you use a rental trailer, follow the instructions that the rental agency gives to you. Do not attach safety chains to the bumper. Trailer brakes Electric brakes and manual, automatic or surge-type trailer brakes are safe if installed properly and adjusted to the manufacturer's - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 165
km (50 miles), thoroughly check your hitch, electrical connections and trailer wheel lug nuts. • When stopped in traffic for long periods of time in hot weather, place the gearshift in P (Park) and increase idle speed. This aids engine cooling and air conditioner efficiency. • Vehicles with trailers - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 166
is separate from the New Vehicle Limited Warranty. The service is available: • 24-hours, seven days a stuck in the mud or snow, are covered (some exclusions apply, such as impound the Owner Guide portfolio in the glove compartment in Ford vehicles and is mailed to you if you own a Mercury or Lincoln - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 167
beyond this period through the Ford Auto Club by contacting your Ford or Lincoln Mercury dealer. Similarly in Canada, you may an emergency to warn traffic of vehicle breakdown, approaching danger, etc. The hazard flashers can be operated when the ignition is off. • The hazard lights control is - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 168
pump shut-off switch. 1. Turn the ignition to the OFF position. 2. Check the fuel system for leaks. 3. If no fuel leak is apparent, reset the fuel pump broken wire within 15 the fuse. Check the appropriate fuses before replacing any electrical components. NOTE: Always replace a fuse with one that has - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 169
Fuses Blue Blue - - Pink Pink Green Green Red Red - Yellow - Brown - Black For fuses greater than 80A, please see your Ford or Lincoln Mercury Dealer. Passenger compartment fuse panel The fuse panel is located below and to the left of the steering wheel by the brake pedal. Remove the panel cover - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 170
Automatic Temperature Control (EATC) Module, Instrument Cluster, Rear Wiper Motor Assembly Rear Exterior Lamps Airbag Diagnostic Monitor Radio, Rear Radio Control, CD Changer Powertrain Control Module, Oxygen Sensors Interior Lamps Smart Entry Control (SEC), Power Mirror Switch Brake Pedal - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 171
Sensor Radio/Video System Hazard Warning Flasher Switch Subwoofer Amplifier Front Blower Motor, Front Blower Motor/ Speed Controller Powertrain Control Module, Lighting Control Module Speed Control, Instrument Cluster, Rear Blower Motor, Data Link Connector #2, Cooling Fans Electronic Automatic - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 172
distribution box is located in the engine compartment. The power distribution box contains high-current fuses that protect your vehicle's main electrical systems from overloads. Always disconnect the battery before servicing high current fuses. Always replace the cover to the Power Distribution Box - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 173
* Lighting Control Module - Not Used - Not Used 40A** ABS Control Module - Not Used 30A** Power Window Relay, Smart Entry Control (SEC)/Timer Module, Power Seats 20A** Low Speed Fan Control Relay - 30A** - 75A** 65A** Not Used Ignition Switch Not Used High Speed Fan Control Relay Front Blower Motor - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 174
Relay box The relay box is located in the engine compartment in front of the battery. Fuse/Relay Location RR DEF ALT 1 2 3 4 5 The relays are coded as follows: Relay location 1 2 3 4 5 6 7 174 Description Start Inhibit Relay Fuel Pump Relay Bulb Check Relay Fog Lamp Anti-theft Relay Horn Relay - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 175
not apply the brake heavily. Instead, gradually decrease your speed. Hold the steering wheel firmly and regular tire and is designed for emergency use only. Replace this tire with a full-size tire as soon • use tire chains • drive through an automatic car wash, because of the vehicle's reduced - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 176
Roadside emergencies Removing the spare tire 1. Open the liftgate, locate the U-shaped slits in the carpet, and flip up the piece of carpet to expose the hex nut. 2. Insert the lug nut wrench on the hex nut in cargo floor. 3. Turn the wrench counterclockwise until tire is lowered - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 177
Install the retainer through the wheel center and slide the wheel under the vehicle. 3. overtighten. 4. Check seating position of tire for looseness against the underbody supports and retighten if be sure the parking brake is set, then block (in both directions) the wheel that is diagonally opposite - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 178
, activate hazard flashers and set parking brake. PUSH TO RELEASE 2. Place gearshift lever in P (Park), turn engine OFF, and block the diagonally opposite wheel. 3. Remove the spare tire and jack assembly. 4. Remove the center ornament or wheel cover from the wheel with the tapered end of the jack - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 179
lug nuts in the order shown. 12. Install wheel cover or center 3 4 ornament on wheel. 13. Put jack assembly away in the proper catalytic converter. Batteries contain sulfuric acid which can burn skin, eyes, and clothing, if contacted. Do not attempt to push start your vehicle. Automatic transmissions - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 180
transmission. Over time, the adaptive learning process will fully update transmission brake on both vehicles and stay clear of the engine cooling fan and other moving parts. 4. Check all battery terminals and remove any excessive corrosion before you attach the battery cables. Ensure that vent caps - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 181
4. Make the final connection of the negative (-) cable to an exposed metal part of the stalled vehicle's engine, away from the battery and the carburetor/fuel injection system. Do not use fuel lines, engine rocker covers or the intake manifold as grounding points. 181 - - - - + + - + + + + - - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 182
an explosion of the gases that surround the battery. 5. Ensure that the cables are clear of fan blades, belts, moving parts of both engines, or any fuel delivery system parts. Jump starting 1. Start the engine of the booster vehicle and run the engine at moderately increased speed. 2. Start the - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 183
jumper cable on the negative (-) connection of the booster vehicle's battery. 3. Remove the jumper cable from the positive (+) terminal of the booster vehicle's battery. 4. Remove the jumper cable from the positive (+) terminal of the disabled vehicle's battery. - - - - + - - + + + + + 183 - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 184
it to idle for several minutes so the engine computer can relearn its idle conditions. When the battery is disconnected or a new battery is installed, the transmission must relearn its adaptive strategy. As a result of this, the transmission may shift firmly. This operation is considered normal - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 185
towed from the rear using wheel lift equipment, the front wheels (drive wheels) must be placed on a dolly to prevent damage to the transmission. If the vehicle is towed by other means or incorrectly, vehicle damage may occur. Ford Motor Company provides a towing manual for all authorized tow truck - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 186
, your dealership can provide the necessary parts and service. Check your "Warranty Guide" to find out which parts and services are covered. Use only recommended fuels, lubricants, fluids and service parts conforming to specifications. Motorcraft parts are designed and built to provide the best - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 187
remove it while the engine is running. OPENING THE HOOD 1. Inside the vehicle, pull the hood release handle located under the bottom left corner of the instrument panel. 2. Go to the front of the vehicle and release the auxiliary latch that is located under the front center of the hood. 3. Lift - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 188
5 4 1. Power distribution box 2. Brake fluid reservoir 3. Air filter assembly 4. Battery 5. Relay box 6. Engine oil filler cap 7. Engine oil dipstick 8. Windshield washer fluid reservoir 9. Engine coolant reservoir 10. Power steering fluid reservoir 11. Automatic transmission fluid dipstick 188 - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 189
care ENGINE OIL Checking the engine oil Refer to the scheduled maintenance guide for the appropriate intervals for checking the engine oil. 1. Make sure the vehicle is on level ground. 2. Turn the engine off and wait a few minutes for the oil to drain into the oil pan. 3. Set the parking brake and - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 190
. Some oil must be removed from the engine by a service technician. 7. Put the indicator back in and ensure it is fully seated. Adding engine oil 1. Check the engine oil. For instructions, refer to Checking the engine oil in this chapter. 2. If the engine oil level is not within the normal range - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 191
unnecessary and could, under certain conditions, lead to engine damage which is not covered by your warranty. Change your engine oil and filter according to the appropriate schedule listed in the scheduled maintenance guide. It is recommended that you replace the engine oil drain plug washer each - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 192
Maintenance and care BRAKE FLUID Checking and adding brake fluid Brake fluid should be checked and refilled as needed. Refer to the scheduled maintenance guide for the service interval schedules. 1. Clean the reservoir cap before removal to prevent dirt or water from entering the reservoir. 2. - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 193
washer fluid for the liftgate Washer fluid for the liftgate is supplied by the same reservoir as the windshield. ENGINE COOLANT Checking engine coolant Your vehicle was factory-filled with a 50/50 engine coolant and water concentration. If the concentration of coolant falls below 40% or above 193 - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 194
when servicing your vehicle in this chapter. If the engine coolant has not been checked at the recommended interval, the engine coolant reservoir may become low or empty. If the reservoir is low or empty, add engine coolant to the reservoir. Refer to Adding engine coolant in this chapter. Automotive - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 195
will decrease the freeze protection characteristics of the engine coolant and may cause engine damage. Plain water may be added in an emergency, but you must replace it with a 50/50 mixture of engine coolant and distilled water as soon as possible. Check the coolant level in the reservoir before you - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 196
begins to release. 3. Step back while the pressure releases. 4. When you are sure that all the pressure has been released, use the cloth to turn it counterclockwise and remove the cap. Recycled engine coolant Ford Motor Company recommends the use of a recycled engine coolant produced by Ford - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 197
should use a 50/50 mixture of engine coolant and distilled water for optimum cooling system and engine protection. CHECKING AND ADDING POWER STEERING FLUID Check the power steering fluid. Refer to the scheduled maintenance guide for the service interval schedules. If adding fluid is necessary - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 198
it reaches the range between the MIN and MAX lines. Be sure to put the cap back on the reservoir. TRANSMISSION FLUID Checking automatic transmission fluid Refer to your scheduled maintenance guide for scheduled intervals for fluid checks and changes. Your transaxle does not consume fluid. However - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 199
brake engaged and your foot on the brake pedal, start the engine and move the gearshift lever through all of the gear ranges. Allow sufficient time for each gear to engage. 4. Latch the gearshift lever in P (Park) and leave the engine transmission fluid should be checked condition of transmission - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 200
condition of HOT transmission fluid may cause shift and/or engagement concerns and/or possible damage. AIR FILTER MAINTENANCE Refer to the scheduled maintenance guide for the appropriate intervals for changing the air filter element. When changing the air filter element, use only the Motorcraft air - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 201
5. Replace the air filter housing cover and secure the four clamps. BATTERY Your vehicle is equipped with a maintenance-free battery which normally does not require additional water during its life of service. However, for severe usage or in high temperature climates, check the battery electrolyte - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 202
flush immediately with water for a minimum of 15 minutes and get prompt medical attention. If acid is swallowed, call a physician immediately. Battery posts, terminals and related accessories contain lead and lead compunds. Wash hands after handling. Your automatic transaxle electronically controls - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 203
the preset radio stations must be reset once the battery is reconnected. • Always dispose of automotive batteries in a responsible manner. Follow your local authorized standards for disposal. Call your local authorized recycling center to find out more about recycling automotive batteries. RE LE - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 204
the vehicle. To replace the filter, perform the following procedure: 1. Remove both windshield wiper arms. • Lift the wiper arm away from the windshield surface until the wiper arm is perpendicular to the windshield surface. • Rotate the small retaining clip at the base - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 205
Remove the six (6) screws (B) from the cowl grille (A) at the base of the windshield. 3. Open the hood. 4. Remove the four (4) windshield washer hose at the Y connector at the rear corner of the engine compartment. 6. Lift the cowl grille from the vehicle. 7. Locate the cabin air filter on the - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 206
four (4) screws from the top surface of the cabin air filter top cover. 9. Remove the cover. 10. Remove the filter element by pulling forward on the top surface of the filter and lifting. B 11. Install the new filter (A) element into the filter retaining frame (B). Ensure that you insert the three - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 207
arm blade onto the windshield surface. WINDSHIELD WIPER BLADES Check the wiper blades at least twice a year or when replace the wiper blades: 1. Pull the wiper arm away from the windshield and lock into the service position. 2. Turn the blade at an angle from the wiper arm. Push the lock pin manually - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 208
defined in Title 49 Code of Federal Regulations Part 575.104(c)(2). U.S. comparative rating based on the wear rate of the tire when tested under controlled conditions on a conditions of their use, however, and may depart significantly from the norm due to variations in driving habits, service - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 209
based on straight-ahead braking conditions on a specified indoor laboratory test wheel Motor Vehicle Safety Standard No. 109. Grades B and A represent higher levels of performance on the laboratory test wheel SERVICING YOUR TIRES Checking the tire pressure • Use an accurate tire pressure gauge. • Check - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 210
in the scheduled maintenance guide. If you notice that the tires wear unevenly, have them checked. • Four tire rotation Replacing the tires Replace the tires when the wear band is visible through the tire treads. When replacing full size tires, never mix radial bias-belted, or bias-type tires - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 211
wheels. Follow these guidelines when using snow tires and chains: • Use only SAE Class S chains. • Install chains securely, verifying that the chains do not touch any wiring, brake lines or fuel lines The suspension insulation and bumpers will help prevent vehicle KNOW ABOUT AUTOMOTIVE FUELS Important - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 212
the fuel system or cause the fuel cap to disengage in a collision, which may result in possible personal injury. Automotive fuels can cause serious injury or the eyes, remove contact lenses (if worn), flush with water for 15 minutes and seek medical attention. Failure to seek proper medical attention could - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 213
with soap and water. Consult a physician immediately if you experience an adverse reaction. When refueling always shut the engine off and never allow sparks or open flames near the filler neck. Never smoke while refueling. Fuel vapor is extremely hazardous under certain conditions. Care should be - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 214
Service Engine Soon" indicator comes on and stays on when you start the engine, the fuel filler cap may not be properly installed. Turn off the engine, remove the cap, align the cap properly and reinstall it. If you must replace the fuel filler cap, replace including manganese-based compounds - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 215
engine sometimes knocks lightly. However, if it knocks heavily under most driving conditions while you are using fuel with the recommended octane rating, see your dealer or a qualified service technician to prevent any engine product in your fuel may not be covered by your warranty. Many of the world - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 216
Instrumentation chapter. Fuel Filter For fuel filter replacement, see your dealer or a qualified service technician. Refer to the scheduled maintenance guide for the appropriate intervals for changing the fuel filter. Replace the fuel filter with an authorized Motorcraft part. The customer warranty - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 217
the engine is left running. • Use the same filling rate setting (low - medium - high) each time the tank is filled. • Allow no more than 2 automatic click accurate estimate of the vehicle's fuel economy under current driving conditions. Additionally, keeping records during summer and winter will show - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 218
the wheels out of alignment will reduce fuel economy. • Use recommended engine oil. Refer to Lubricant Specifications. • Perform all regularly scheduled maintenance items. Follow the recommended maintenance schedule and owner maintenance checks found in your vehicle scheduled maintenance guide. 218 - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 219
accessories to your vehicle (for example bug deflectors, rollbars/light on hilly terrain. • Transmissions give their best fuel economy should be your guide for the fuel conditions. EMISSION CONTROL SYSTEM Your vehicle is equipped with various emission control components and a catalytic converter - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 220
Motor Company parts in performance and durability. Do not park, idle, or drive your vehicle in dry grass or other dry ground cover. The emission system heats up the engine compartment and exhaust system, which can start a fire. Illumination of the "Service Engine Soon" light, charging system warning - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 221
mode is acceptable between steps. Once started, do not turn off the engine until step seven is completed. BULBS Replacing exterior bulbs It is a good idea to check the operation of the following lights frequently: • Headlamps • Turn signals • Cornering lamps • High-mount brakelamp • Tail lamps 221 - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 222
time, contaminants may enter the lamp housings and affect performance. Replacing headlamp bulbs To remove the headlamp bulb: 1. Make sure headlamp the plastic base. Keep the ring to retain the new bulb. 4. Without turning, remove the old bulb from its socket by gently pulling it straight back out of - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 223
"stop." 3. Connect the electrical connector into the rear of the plastic base until it snaps, locking it into position. 4. Turn the headlamps on you changed the bulb, you should not need to align it again. Replacing front cornering/side marker lamp bulbs 1. Remove screw from the lamp assembly. - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 224
assembly. 3. Pull bulb straight out of socket and push in the new bulb. 4. To complete installation, follow removal procedure in the reverse order. Replacing tail lamp/backup/turn signal lamp bulbs 1. Open the liftgate to expose the lamp assemblies. 2. Remove the two screws from the lamp assembly - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 225
to the liftgate and secure with two screws. Using the right bulbs Replacement bulbs are specified in the chart below. Headlamp bulbs must be marked North America and an "E" for Europe to assure lamp performance, light brightness and pattern and safe visibility. The correct bulbs will not damage - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 226
replace all instrument panel lights - see your dealer. AIMING THE HEADLAMPS The headlamps on your vehicle are properly aimed at the assembly plant. If your vehicle has been in an accident the alignment of your headlamps should be checked by a qualified service and plenty of water for best results. - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 227
application instructions on the products. Remove particles such as bird droppings, tree sap, insect remains, tar spots, road salt and industrial fallout immediately. Cleaning the wheels Wash with the same detergent as the body of your vehicle. Do not use acid-based or alcohol-based wheel cleaners - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 228
• Take care when using a power washer to clean the engine. The high pressure fluid could penetrate the sealed parts and cause damage. • Do not spray with cold water to avoid cracking the engine block or other engine components. • Never apply anything to the drive belt (including belt dressing). 228 - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 229
• Cover the highlighted areas to prevent water damage when cleaning the engine. • Never wash or rinse the engine while it is running; water in the running engine may do not form when you rinse it with water. The windshield, rear window and wiper blades should be cleaned on a regular basis, - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 230
the steering wheel or instrument panel to avoid contamination of the air bag cover with upholstery cleaner. Do not use chemical solvents or strong detergents when cleaning the seat mounted side air bag. Such products could contaminate the side air bag system and affect performance of the side air - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 231
and special pad, cleans the leather and maintains its natural beauty. Follow the instructions on the water. Do not use household cleaning products because they may weaken the safety belt webbing or damage the vinyl parts of the seat. The child seat liner is removable and may be machine-washed and air - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 232
PART NUMBERS Component Engine air filter element Cabin air filter Fuel filter Battery Oil filter PCV Valve Spark plugs 1 1 3.3L V6 engine FA Engine oil (includes filter change) Brake fluid Ford Part Name Motorcraft SAE 5W-30 Super Premium Motor Oil High Performance DOT 3 Motor Vehicle Brake - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 233
Brake fluid Ford part name High Performance DOT 3 Motor Vehicle Brake Fluid Silicone Lubricant Ford Premium Engine Coolant (green colored) Ford part number C6AZ-19542-AB Ford specification ESA-M6C25-A and DOT 3 Door weatherstrips Engine coolant Engine oil Motorcraft SAE 5W-30 Super Premium Motor - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 234
Temp.) Ultra-clear Windshield Washer Concentrate Ford part Ford number specification D7AZ-19A331-A ESE-M1C171-A (Motorcraft WA-10) E43Z-19590-A C9AZ-19550-AC ESP-M1C207-A ESR-M17P5-A Constant velocity joints Windshield washer fluid ENGINE DATA Engine Cubic inches Required fuel Firing order Spark - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 235
Capacities and specifications 3 5 2 4 1 235 - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 236
XXX kPa COLD SINGLE THIS VEHICLE CONFORMS TO ALL APPLICABLE FEDERAL MOTOR VEHICLE SAFETY STANDARDS IN EFFECT ON THE DATE OF MANUFACTURE SHOWN Engine and transmission serial number The engine serial number is stamped on the engine block, and the transmission serial number is on the - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 237
Plan You can get more protection for your new car or light truck by purchasing Ford Extended Service Plan (Ford ESP) coverage. Ford ESP is an optional service contract which is backed by Ford Motor Company or Ford Motor Service Company (in the U.S.) and Ford of Canada (in Canada). It provides - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 238
the Ford Customer Relationship Center. Ford Motor Company and Ford of Canada dealerships also carry quality parts and accessories, providing you with equipment reliability. Away from home If you own a Ford or Mercury vehicle and are away from home when your vehicle needs service, or if you need - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 239
Relationship Centre Ford Motor Company of Canada, Limited P.O. Box 2000 Oakville, Ontario L6J 5E4 1-800-565-3673 (FORD) In order to help you service your Ford or Lincoln Mercury vehicle, please have the following information available when contacting a Customer Relationship Center: • Your telephone - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 240
or state replacement or service without notice and without incurring obligations per applicable state law. What kinds of cases does the Board review? Unresolved warranty repair concerns or vehicle performance as designed concerns on Ford and Lincoln Mercury cars and Ford and Lincoln Mercury light - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 241
member is chosen from Ford and Lincoln Mercury dealership management, recognized for their business DSB's independent administrator Your dealership and a Ford Motor Company representative will then be asked to submit statements serviced the vehicle • a brief description of your unresolved concern 241 - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 242
Customer assistance • a brief summary of the action taken by the dealer(s) and Ford Motor Company • the names (if known) of all the people you contacted at the dealership(s) • a description of the action you expect to resolve your concern You - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 243
Ford Motor Company Customer Relationship Center 16800 Executive Plaza Drive P.O. Box 6248 Dearborn, Michigan 48121 UTILIZING THE MEDIATION/ARBITRATION PROGRAM (CANADA ONLY) In those cases where you continue to feel that the efforts by Ford and the dealer to resolve a factory-related vehicle service - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 244
engine damage. Ford Motor Company/Ford of Canada is not responsible for any damage caused by use of improper fuel. In the United States, using leaded fuel may also result in difficulty importing your vehicle back into the U.S. If your vehicle must be serviced engineered to fulfill your automotive - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 245
are available for your vehicle through your local authorized Ford, Lincoln Mercury or Ford of Canada dealer. These quality accessories have been specifically engineered to fulfill your automotive needs; they are custom designed to complement the style and aerodynamic appearance of your vehicle - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 246
block heater Seatback organizer Tire step Travel equipment Ash cup Auto headlamps with daytime running lights (DRL) Cigarette lighter element Console Daytime running lights (DRL) Framed luggage covers Heavy-duty battery HomeLink (in sun visor) Molded running boards Rear view mirror with HomeLink - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 247
systems - such as two-way radios, telephones and theft alarms - that are equipped with radio transmitters. Any such equipment installed in your vehicle should comply with FCC or CRTC regulations and should be installed only by a qualified service technician. • Mobile communications systems may - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 248
engine to stumble or stall or cause the transmission LITERATURE To order the publications in this portfolio: Make checks payable to: HELM, INCORPORATED P.O. Box 07150 Detroit guide French Owner's Guides can be obtained from your dealer or by writing to Ford Motor Company of Canada, Limited, Service - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 249
of vehicles, it may order a recall and remedy campaign. However, NHTSA cannot become involved in individual problems between you, your dealer or Ford Motor Company. To contact NHTSA, you may either call the Auto Safety Hotline toll-free at 1-800-424-9393 (202-366-0123 in the Washington D.C. area) or - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 250
...136 driver air bag ...134 indicator light ...8, 135 operation ...134 passenger air bag ...134 Air cleaner filter ...200, 232 Air conditioning ...24 automatic temperature control system ...31 Air filter, cabin ...203 Antifreeze (see Engine coolant) ...193 Anti-lock brake system (see Brakes) ...152 - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 251
automatic transmission fluid ...198 engine oil ...189 Doors door ajar warning ...10 lubricant specifications ...233 Driving under special conditions through water ...159 E Emergencies, roadside jump-starting ...179 Emission control system ...219 Engine ...234 check engine/service engine soon light - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 252
fuel ...211, 213, 216 filter, specifications ...216, 232 fuel pump shut-off switch ...167 gauge ...16 improving fuel economy ...216 low fuel warning light ...11 octane rating ...215, 234 quality ...215 running out of fuel ...216 safety information relating to automotive fuels ...211 Fuses ...168 - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 253
...106 Lights, warning and indicator ...8 air bag ...8 anti-lock brakes (ABS) ...11, 153 brake ...9 charging system ...8 cruise indicator ...10, 86 door ajar ...10 high beam ...10 low fuel ...11 low washer fluid ...13 oil pressure ...9 overdrive off ...13 safety belt ...9 service engine soon - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 254
alarm feature, remote entry system ...102 Parking brake ...153 Parts (see Motorcraft parts) ...232 Power distribution box (see Fuses) ...172 Power door locks ...92 Power steering ...154 fluid, checking and adding ...197 fluid, refill capacity ...232 fluid, specifications ...233-234 R Radio ...42 - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 255
234 Transmission fluid, checking and adding (automatic) ...198 lubricant specifications ...233 Trip odometer ...16 Turn signal ...10, 87 V Vehicle dimensions ...234 Vehicle Identification Number (VIN) ...236 Vehicle loading ...160 Ventilating your vehicle ...151 W Warning chimes ...13 Warning lights - 2001 Mercury Villager | Owner Guide 2nd Printing - Page 256
correct automatic transmission fluid is used. Transmission fluid requirements are indicated on the dipstick or on the dipstick handle. MERCON and MERCON V are not interchangeable. DO NOT mix MERCON and MERCON V. Refer to your scheduled maintenance guide to determine the correct service interval
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
-
84
-
85
-
86
-
87
-
88
-
89
-
90
-
91
-
92
-
93
-
94
-
95
-
96
-
97
-
98
-
99
-
100
-
101
-
102
-
103
-
104
-
105
-
106
-
107
-
108
-
109
-
110
-
111
-
112
-
113
-
114
-
115
-
116
-
117
-
118
-
119
-
120
-
121
-
122
-
123
-
124
-
125
-
126
-
127
-
128
-
129
-
130
-
131
-
132
-
133
-
134
-
135
-
136
-
137
-
138
-
139
-
140
-
141
-
142
-
143
-
144
-
145
-
146
-
147
-
148
-
149
-
150
-
151
-
152
-
153
-
154
-
155
-
156
-
157
-
158
-
159
-
160
-
161
-
162
-
163
-
164
-
165
-
166
-
167
-
168
-
169
-
170
-
171
-
172
-
173
-
174
-
175
-
176
-
177
-
178
-
179
-
180
-
181
-
182
-
183
-
184
-
185
-
186
-
187
-
188
-
189
-
190
-
191
-
192
-
193
-
194
-
195
-
196
-
197
-
198
-
199
-
200
-
201
-
202
-
203
-
204
-
205
-
206
-
207
-
208
-
209
-
210
-
211
-
212
-
213
-
214
-
215
-
216
-
217
-
218
-
219
-
220
-
221
-
222
-
223
-
224
-
225
-
226
-
227
-
228
-
229
-
230
-
231
-
232
-
233
-
234
-
235
-
236
-
237
-
238
-
239
-
240
-
241
-
242
-
243
-
244
-
245
-
246
-
247
-
248
-
249
-
250
-
251
-
252
-
253
-
254
-
255
-
256
 |
 |
Before driving
Introduction
2
Instrumentation
6
Controls and features
22
Seating and safety restraints
110
Starting and driving
Starting
148
Driving
152
Roadside emergencies
166
Servicing
Maintenance and care
186
Capacities and specifications
232
Customer assistance
237
Reporting safety defects
249
Index
250
All rights reserved. Reproduction by any means, electronic or mechanical including
photocopying, recording or by any information storage and retrieval system or translation
in whole or part is not permitted without written authorization from Ford Motor Company.
Ford may change the contents without notice and without incurring obligation.
Copyright © 2000 Ford Motor Company
Contents
1