2007 Nissan Versa Owner's Manual - Page 35
2007 Nissan Versa Manual
Page 35 highlights
Installing top tether strap (hatchback model) First, secure the child restraint with the seat belt or LATCH (rear outboard seat positions only), as applicable. 1. Remove the head restraint. Store it in a secure location. Be sure to install the head restraint when the child restraint is removed. 2. Position the top tether strap over the top of the seatback. WRS0760 1. Flip up the anchor cover 1 from the anchor point which is located directly behind the child seat. 2. Position the top tether strap over the top of the seatback. 3. Secure the tether strap to the tether anchor point on the seat directly behind the child restraint. 4. Tighten the tether strap according to the manufacturer's instructions to remove any slack. If you have any questions when installing a top tether strap child restraint on the rear seat, consult your NISSAN dealer for details. Sedan 3. Secure the tether strap to the tether anchor point on the seat directly behind the child restraint. 4. Tighten the tether strap according to the manufacturer's instructions to remove any slack. If you have any questions when installing a top tether strap child restraint on the rear seat, consult your NISSAN dealer for details. Top Tether Anchor Point Locations Anchor points are located on the back of the rear seats (hatchback model) or on the rear parcel shelf (sedan model).. CHILD RESTRAINT INSTALLATION USING LATCH WARNING ● Attach LATCH compatible child restraints only at the locations shown. For the LATCH lower anchor locations, see "Lower Anchors and Tethers for CHildren System (LATCH)" in this section. If a child restraint is not secured properly, your child could be seriously injured or killed in an accident. Installing top tether strap (sedan model) First, secure the child restraint with the seat belt or LATCH (rear outboard seat positions only), as applicable. Safety-Seats, seat belts and supplemental restraint system 1-19