2015 Nissan Murano Navigation System Owner's Manual - Page 173

8. Troubleshooting guide SYSTEM UNIT LIQUID CRYSTAL DISPLAY Symptom The screen is too dark. Possible cause The cabin temperature is too low. Screen brightness is set to the maximum darkness. The screen is too bright. Possible solution Wait until the cabin temperature becomes moderate. Adjust the brightness setting of the screen. "Display settings" (page 2-15) Screen brightness is set to the maximum brightness. Adjust the brightness setting of the screen. "Display settings" (page 2-15) This is not a malfunction. A small black spot or a small bright spot appears on This is a typical phenomenon for liquid crystal the screen. displays. A dot or stripe pattern appears on the screen. Electromagnetic waves that are generated from neon This is not a malfunction. billboards, high voltage electric power cables, ham radios or other radio devices equipped to other vehicles may adversely affect the screen. This is a typical phenomenon for liquid crystal displays. The cabin temperature is less than 508F (108C). This is not a malfunction. Wait until the cabin temperature rises to within 508F (108C) and 1228F (508C). Adjust the brightness setting of the screen. "Display settings" (page 2-15) Contact a NISSAN dealer for an inspection. If the SD card containing map data is accidentally removed, after reinserting the SD card containing map data into the slot, place the ignition switch in the "OFF" position and then place back in the "ON" position again. Image lag appears on the screen. Image motion displayed on the screen is slow. When looking at the screen from an angle, the screen This is a typical phenomenon for liquid crystal lightens or darkens. displays. The screen turns blue or an error message is displayed on the touch screen display. A system malfunction has occurred. The SD card is not inserted into the slot correctly. 8-3